Recent content by jamiek

I am having lines appear on my prints please see below image for examples (this is 3 different prints). I can get the occasional good print, but 2/3 are bad. The printer is a Canon iP8750 around 6 months old. I have run a few cleaning cycles and deep clean cycles, the test print before running...

I have tried with the two papers I have, Marrutt Matt and Fotospeed Matt. The paper looks flat to me, I have come up with a workaround which helps. All have my prints have a light sky in them, I've starting flipping the prints so the last part that comes out is the light sky and it is barely...

Makes sense, though it is doing it with all images, unfortunately. Maybe it is something to do with my paper size settings / borderless printing :/ It is worse on A3 as it seems to be a few cm instead of around 1cm on A4. I am printing via Lightroom layout margins set to 0, cell size set to...

Update - I tried this, unfortunately, it made it 10x worse :LOL:

Thanks, I'll try with this checked and see if it fixes :)

I am having an issue with my printer Canon iP8750. The last cm or so of prints are not printing correctly and look extremely grainy as you can see below. What is causing this / how to fix? I am printing via Lightroom on a Mac on Matt 230gsm paper by Fotospeed & Marrutt. Thanks

Yes, it isn't an issue if a dark ink goes over it but that isn't always possible. I have been viewing them under a bright artificial light/by the window natural daylight. In these conditions, it is possible around 12" once your eye catches them and focuses on them. In "medium" light conditions...

I have both A4 and A3, both have the same marks. I first noticed it after printing and thought it was the printer. After looking at the printer and not resolving the issue I looked at the rest of the unprinted paper which is when I discovered the issue. I do find it odd you can't find any...

Hi, I am new to printing my own stuff and have been experimenting with paper. I first tried Marrutt matt https://www.marrutt.com/inkjet-papers/marrutt-papers/marrutt-matt-papers/marrutt-230gsm-archival-matt-single-sided-paper the print quality/colours are great but then noticed little black...

Your correct, it is in fact Styrene! Dam. I might get one of the brushes, are you meant to wipe it before and after you remove the protective sheet?

Any tips to eliminate dust when framing with acrylic? I've tried using a soft brush but it left hairline swish marks on it when I held the acrylic in a certain angle. I'm not if this has scratched it or it is residue. I've tried canned air, it helps but doesn't eliminate all dust. Cheers

Thanks John. I had considered a painters extension pole, though they seem a faff to get a thread on for my flash :/

Dude, THANK YOU! 3.5m https://www.amazon.co.uk/Andoer-Lightweight-Microphone-Boompole-Aluminum/dp/B01HETYCW6/ looks perfect!

I'll have a look for them, thanks. It's to attach a strobe on for lighting interiors. I've been using my light stand and just holding that up, but it's heavy and sometimes I need an extra. Tempted with this...

Hey folks, Can anyone recommend a really long monopod? Looking at 2.5 meters - 3 meters if possible. Cheers, J