curved facade

Messages
18,182
Name
Geof
Edit My Images
Yes


this is a pano which went wrong in ps2 so i used autostitch which did a good join but reduced my large images combined to around 300Mb
the quality dropped somewhat
any advice on how to do a stitch better please let me know
cheers
geof
 
To be honest I think that the has come out good (y) I'm not really sure on suggestions for improvement unless there was a way to integrate the water and reflection into the frame that thee appears to be in the lower right :thinking:

Matt
 
what an interesting place!

only crit is that the sky looks very 'bitty' and noisy, but it's very well exposed :)
 
Nice shot and well exposed, but i agree on the sky and the verticals on the left seem a touch on the slant. Should be fixable in PS.

absolutely...!!
the tilted up wide angle always does a bit of off vertical effects
and compensating in ps...mine is ps 2...quite old...but i will have a look and see if there is any method contained in it i can use
or can you make a suggestion how to right soaring verticals
and your flikr is magic...really good solid shots with none of the results i got
cheers
geof
 
what an interesting place!

only crit is that the sky looks very 'bitty' and noisy, but it's very well exposed :)

it was an abomination right from the start
two 10Mb raw images stitched with auto stitch eventually came down to 422Kb and all fuzzy round the edges...something went wrong
usually my uploads are between 5-15Mb
cheers
geof
 
E7F7D862F1844A5890B4222ADDDE6D37-0000337647-0002687224-00800L-56E3ADE72E3D41128D629345E4505D4D.jpg


I like it Geof, my only crit is the vertical wall to the left leans a bit.

I have taken the liberty of straightening it but in doing so I've clipped the top of the building, not too sure I could live with that :shrug: perhaps there is more space above on the original.

curve.jpg
 
E7F7D862F1844A5890B4222ADDDE6D37-0000337647-0002687224-00800L-56E3ADE72E3D41128D629345E4505D4D.jpg


I like it Geof, my only crit is the vertical wall to the left leans a bit.

I have taken the liberty of straightening it but in doing so I've clipped the top of the building, not too sure I could live with that :shrug: perhaps there is more space above on the original.

curve.jpg

jolly big thanks Dave
i really could be doing with that tool for the next round of architecture
can you clue me in on how you did it...in the meanwhile i will browse through my ps 2 to see if it has this function...many thanks
geof
 
Back
Top