Kodak H35N issues

Messages
11,157
Name
Suz
Edit My Images
Yes
Anyone got one and found the flash setting dial won’t move and the star filter lever is also very stiff? Mine has started doing that. I can’t remember if the shutter makes a noise or not. I don't think it has a lockout.

I haven't used it in months but i don’t remember it being this bad. Only used it twice so it is a bit annoying. Was going to use it for the sh,,,, camera challenge.
 
Last edited:
Optimistically tried to load a film into it and it's not winding on nicely at all so I think it's basically fit for the bin :rolleyes: So that's 2 dead cameras from Reto both with transport issues that make them unusable. Judging by the amazon comments I'm not alone with having it die after barely any use :mad:
 
I'd looked at a H35N on occasion but, now thankfully it seems, didn't get round to buying one.

Hope you've had it less than an year and can get a refund.
 
AI Overview




The flash setting ring on the Kodak H35N is intentionally tight and stiff to prevent it from accidentally turning on in a bag or pocket. [1, 2]

How to Fix a Stuck Flash Dial
    • Apply firm, steady pressure: Grip the textured ring around the lens firmly and turn it clockwise or counterclockwise. Do not force it with tools, but do not be afraid to use noticeable finger strength.
    • Check the star filter lever: Users on Talk Photography note that the star filter lever and flash ring on the H35N can both become stiff if the camera sits unused for a long time. Moving the nearby star filter switch back and forth can sometimes help free up the front housing assembly. [1]
    • Inspect for debris: Check around the base of the lens ring for grit, sand, or sticky residue that might lock the plastic ring in place.

Interesting that it refers back to this thread! :thinking:
 
Interesting that it refers back to this thread! :thinking:

I did try and find my needle nosed pliers to see if i can move the flash wheel.

Might have to use the blower brush thing to see if i can firtle dirt out from under the flash dial. It’s literally immovable. I did try wanging the star filter lever back and forth too.
 
Had a go with the blower brush and also wanged the star filter lever some more. Noticed the star filter lever is less stiff when you distort the camera body by squeezing it.

I can only move the flash dial by hand if I squeeze the body and twist down on the flash dial with excessive force like I am trying to rip it off the front. It will not move otherwise. It isn't something you would expect to do to switch between flash off or on.

If I want to move it easily then i need the needle nose pliers. Took a while to find them. You can feel it loosen and then snag depending on how much squeeze you put on the body.

It is on the naughty shelf.
 
Back
Top