Official Chroma Camera Thread - All questions/suggestions/feedback appreciated

I’ve got an updated top plate on the Pin12 now, with integrated slots to secure the internal frame dividers so they don’t get lost when you’re shooting the full 6x12 format;

View attachment 489343View attachment 489344View attachment 489345

I haven’t had chance to put a roll through this updated design yet, and probably won’t get chance for another few weeks, so if anyone in the UK is up for putting a test roll through this, I’m happy to ship it out to you and cover the return postage too.

If you’ve got time to shoot some film, in any or all of the available formats, let me know and I’ll get it packed up.

Cheers
Steve
Good news! The Pin12 is now available via my website HERE

Pin12 Group.jpg

Myself and my new workshop assistant, Chroma Jake (my son) have built up a small batch of cameras over the last 2 weeks, ready for immediate despatch. There are currently 8 of these left. Once these have gone, I'll be building new cameras to order like all of my others, with an estimated 2 week build time.

Cheers
Steve
 
Last edited:
I was making a slight design change to the film caddy of my Six7 multi-format camera over the weekend to reduce the number of separate frame masks that it needs so decided to build up a complete camera for myself.

DSC05815-Photoroom.jpeg

I’ve previously built one of my Six17 cameras using the same technique to give the camera “patina” and make it look like it’s been brassed through use.


DSC03372.JPG

The camera itself is printed in a brass-look metal style filament and then sprayed with a flat matte black paint. Once the paint has hardened a little I then go over it all with a combination of tools/light sandpaper to give it some localised “wear”. I then finished it off with a gloss lacquer to give the paint strength and prevent further loss of finish,

It’s a unique finish that I like, although it’s obviously cheating in terms of true “patina”, mainly because the camera itself isn’t machined from brass!


DSC05790-Photoroom.jpegDSC05787-Photoroom.jpegDSC05791-Photoroom.jpeg

I’ve also found a practical way to add frame lines to the ground glass for the various formats the Six7 offers;

Whole glass - 6x7
Middle landscape rectangle - 6x3 pano
Larger square - 6x6
Centre vertical rectangle - 35mm Xpan-style 30x68mm (exposing sprocket holes)

DSC05818-Photoroom.jpeg

DSC05810-Photoroom.jpegDSC05796-Photoroom.jpeg

I build all of my cameras to order, the Six7 is available to configure here;


Cheers
 
Back
Top