- Messages
- 548
- Name
- Andreas
- Edit My Images
- No
So I've got a bit of history with 'the brick'. Previously I had borrowed a colleagues lens for the occasional wedding I did, before I used the earnings to buy the brick (already have a 24-105mm IS f4.0 L - which is great but needed better low light performing lens).
Initially I bought a second hand lens from Ffordes, for about £700. It arrived, and the manual ring was broken, so I sent it straight back (Ffordes did quibble stating it was fine when posted, when clearly it wasn't), and was given a choice between repair and refund. The price was still decent, so I opted for a repair. When it came back, I noticed that the barrel 'drooped' when zoomed to 24mm (barrel is extended), complained, and had it sent off again for a second repair being that it was still within their 6 month repair window. It took them three months to repair it...
When it came back, I found the image quality pretty poor in comparison to my colleague's sample. When I complained they said I could send it off again (bearing in mind at this point I had a month left on warranty), I didn't bother, and eventually sold on the lens at a loss of £200 - lesson learned.
So with the proceeds of another wedding, I purchased a brand new 24-70mm. Now again I'm looking at the quality of the lens, and I'm not happy with the sharpness at f2.8. Soft compared to my 24-105 at the same focal points. Its been sent back for calibration by Canon once (I didn't return the lens at the time, as I'd been in a waiting list for several months for the low stock item in the first place), its come back with some comments along the lines of some re-balancing, but hardly any difference in the quality of the image. Its been suggested that I should return the lens along with the camera for calibration (this will involve a cost, as my camera is out of warranty), which I'm happy to do.
However, following a conversation with my CPS rep I suspect that this exercise won't bear any fruit - his explanation being that its a mass-produces lens; and stating that it probably performs better than the 24-105 f4 when stopped down to f4, despite the whole purpose of buying the lens is to get a lens which performs well wide open (low light conditions).
What do you suggest I do? The lens is still under warranty, is there scope to demand a replacement by Canon? He has suggested that when I send the lens off for calibration with the body, that I should include sample photos with my colleague's lens to show the performance I'd expect from the lens, so that the technicians can aim at - baffling as surely what they need to aim at is as sharp a possible an image wide open.
Initially I bought a second hand lens from Ffordes, for about £700. It arrived, and the manual ring was broken, so I sent it straight back (Ffordes did quibble stating it was fine when posted, when clearly it wasn't), and was given a choice between repair and refund. The price was still decent, so I opted for a repair. When it came back, I noticed that the barrel 'drooped' when zoomed to 24mm (barrel is extended), complained, and had it sent off again for a second repair being that it was still within their 6 month repair window. It took them three months to repair it...
When it came back, I found the image quality pretty poor in comparison to my colleague's sample. When I complained they said I could send it off again (bearing in mind at this point I had a month left on warranty), I didn't bother, and eventually sold on the lens at a loss of £200 - lesson learned.
So with the proceeds of another wedding, I purchased a brand new 24-70mm. Now again I'm looking at the quality of the lens, and I'm not happy with the sharpness at f2.8. Soft compared to my 24-105 at the same focal points. Its been sent back for calibration by Canon once (I didn't return the lens at the time, as I'd been in a waiting list for several months for the low stock item in the first place), its come back with some comments along the lines of some re-balancing, but hardly any difference in the quality of the image. Its been suggested that I should return the lens along with the camera for calibration (this will involve a cost, as my camera is out of warranty), which I'm happy to do.
However, following a conversation with my CPS rep I suspect that this exercise won't bear any fruit - his explanation being that its a mass-produces lens; and stating that it probably performs better than the 24-105 f4 when stopped down to f4, despite the whole purpose of buying the lens is to get a lens which performs well wide open (low light conditions).
What do you suggest I do? The lens is still under warranty, is there scope to demand a replacement by Canon? He has suggested that when I send the lens off for calibration with the body, that I should include sample photos with my colleague's lens to show the performance I'd expect from the lens, so that the technicians can aim at - baffling as surely what they need to aim at is as sharp a possible an image wide open.
even at web size - where was your point of focus ?