Canon's specifications for the 50mm f/1.4 must be pretty loose

Messages
782
Edit My Images
No
After Canon messed up the calibration of my 40D during a repair it was consistently back focusing with my three lenses, so I sent it and my lenses for calibration. I sent a 70-200mm f/4L & a 50mm f/1.4, and asked if they could check the 50mm f/1.4 as I thought it was showing up more chromatic aberration than it should.

They just came back today and happily the body seems to be fine as it now focuses properly with my 70-200mm and the lens that I chose not to send for calibration (a 28-105mm).
Unfortunately my 50mm f/1.4 is now horrifically front focusing. The further away the target the more it misses by but it's missing at close range too.

Here's an example at f/2.8.
5014Test.jpg

The focus target was the fire, but the lens is focused on the ridge at the bottom of the shot. There are hundreds of metres between the target and the in focus area.
I reproduced this a lot at different distances, with different targets and at different apertures.

So what did Canon have to say about the lens on the note that was in with the equipment when it returned? Well...
5014ServiceNote.jpg


Blimey :lol:
If it was like this when they'd finished with it then whoever checked it needs their eyes testing.

So tomorrow I'll be arranging my third bit of servicing as the fallout of one Err 99. The annoying thing is I wanted to put the 50mm up for sale tonight.
 
Back
Top