DIY Super Macro from a Canon 18-55mm kit lens

I thought somebody produced a reversing ring which maintained electrical contact for Canon already. Personally, I'll stick with my Tamron 90mm for now!
 
I've just started playing around with my 50mm F1.8 bolted onto my 70-200mm F2.8. It works surprisingly well with the 50 wide open focused to infinity and then using the focus on the 70-200. This is a quick test shot so far of the P on a one penny coin:

b001.jpg


I need to try something in some decent light not at high ISO and see what its actually capable of.
 
I thought somebody produced a reversing ring which maintained electrical contact for Canon already. Personally, I'll stick with my Tamron 90mm for now!

how could a reversing ring maintain electrical contact - there are no electrical contacts on the front of the lens to connect to :thinking:
 
Originally Posted by Nod said:
I thought somebody produced a reversing ring which maintained electrical contact for Canon already. Personally, I'll stick with my Tamron 90mm for now!

how could a reversing ring maintain electrical contact - there are no electrical contacts on the front of the lens to connect to :thinking:

I think he may be referring to the reverse EOS adapter made by Novoflex - see here:

" For example, a 28-105mm lens reversed will give a range of magnifications from 1:7 at the 105mm end to 2.8:1 at the 28mm end, which is much more flexible than a typical macro lens.
- And, because a lens is computed to work best at infinity, reversing it means that it gives superb quality at high magnifications.
- Can also be used with a bellows for even higher magnifications.


Looks very interesting.
 
Be OK if you had a lens with a duff focus motor,


Dave.
 
Interesting. :)

Although is the remnant of floppy cable just dangling out attached to nothing?
 
One end's attached to the contact points that talk to the body, the other end's attached to the AF motor - or is it just setting the aperture?

In between, well, yeag, it's just kinda dangling. :)
 
One end of the floppy cable is attached to the EF chip that attaches to the camera
the other end of the floppy cable is soldered into the front part of the lens (originally the back) which connects to the aperture settings, etc, etc basically all the connections to and from the camera, as he has reversed the lens he has had to re-connect all these pins
 
Ah I thought that may be the case, just looked like it wasn't attached to anything in the last minute or two.
 
I think he may be referring to the reverse EOS adapter made by Novoflex - see here:

" For example, a 28-105mm lens reversed will give a range of magnifications from 1:7 at the 105mm end to 2.8:1 at the 28mm end, which is much more flexible than a typical macro lens.
- And, because a lens is computed to work best at infinity, reversing it means that it gives superb quality at high magnifications.
- Can also be used with a bellows for even higher magnifications.


Looks very interesting.

That is indeed the beastie I was thinking of. Not a cheap option though and leaves the cavity around the rear element open to the elements so loads of dust can get in to leap out onto the sensor. I'll still stick with my Tamron 90mm, thaks.
 
That is indeed the beastie I was thinking of. Not a cheap option though and leaves the cavity around the rear element open to the elements so loads of dust can get in to leap out onto the sensor. I'll still stick with my Tamron 90mm, thaks.

You can "seal" the end by using a [UV] filter, to avoid the ingress of dust, as that part of the adapter (rear element end) has a filter thread built in.
 
Good thinking on their part!
 
Anyone watched Dexter? The visual style really reminds me of that. It is a superbly made video, irrelevant of the content :p

I love Dexter and I was actually thinking along precisely those lines whilst watching it!

Seriously impressive stuff.
 
Back
Top