I can see some dirt in my viewfinder. Where is it and how do I get rid?

Messages
679
Name
Simon
Edit My Images
Yes
Hi guys,

I noticed yesterday, in the top right hand corner of my viewfinder, I could see a spec of dust/dirt and a strand of fabric or something like that. I took a couple of shots of the lamp in the lounge, couldn't see the marks on the picture, so I don't think they're on the sensor. Used the rocket blower on the viewfinder/eyepiece itself, and took the lens off and had a blow around inside (not on the sensor though), but it's still there.

Do you think it's on the mirror or something like that? How do I get it clean (I've never cleaned a sensor, or mirror, or anything like that before, and tbh it makes me a bit nervous thinking about it)

Cheers
Simon
 
Sounds like it could be under/on the focusing screen to me, that may have to come out carefully for a clean - only thing is the screen once out can get a little static so it's difficult to get it completely clean sometimes.
 
Sounds like it could be under/on the focusing screen to me, that may have to come out carefully for a clean - only thing is the screen once out can get a little static so it's difficult to get it completely clean sometimes.

Thanks for your reply.

Think I'll try and get an expert to take a look. Anyone in the London area know somewhere good?

Alternatively I can make a trip to Park Cameras at somepoint as I know they have a cleaning service
 
If you can see it in the VF, then it is on the mirror or possibly the focussing screen. Think about it: If you can see it in your VF, then it can't be on the sensor as you don't look through it!

Unless it is majorly bothering you I'd leave it. Rather let sleeping dogs lie; and since you've already tried blowing it, it sounds quite stubborn. You could try using a fine paintbrush to dislodge it.
 
Hi, I have the same thing. Weirdly, I didn't get any for about 6 months from new, now I get it quite a bit (probably from changing lenses etc).

For me it is dust on the focussing screen. I did a google on how to clean it - with mine it's very easy, I just remove the screen with a pair of tweezers and blow it with the rocket blower. Be very careful when looking at cleaning anything like this because you can do more harm than good by going in with cloths and chemicals etc.

To be honest, if it's only a couple of specs I would leave it. It doesn't affect your pictures and if you pay to get it cleaned, it will only come back!
 
Just try carefully pointing a rocket blower at it, might shift it
 
In my experience for every 1 spec you dislodge with a rocket blower from the focusing screen, you will introduce 2 more.

Unless it is huge and doing your head in, leave it. You'll get more in time. Wait until you've accumulated a decent collection and then get it serviced by Nikon service centre or good independent.

I used to get really anal about visible specs in the VF but now take the attitude that if they don't effect your shots then they don't exist. Same goes for sensor dust, if it isn't visible at the apertures I shoot at then it isn't a problem.

Dust and DSLRs is a fact of life, if it is an issue deal with it. If it isn't an issue, live with it.
 
Its probably on the Focusing Screen itself. I have this problem all the time and a quick blow with a rocket blower does the trick (I dont even take it out). Also I would personally not recommend using a brush, since often it can leave small strands on the FS. I don't think that this is a reason to go to a professional and waste your money on service. It should be quite a simple DIY job!

Good Luck with it!
 
I often get dust particles on my mirror.
Just buy yourself a rocket blower and give it a good old blast.
Don't use chemicals, compressed air cans or brushes, you could do more harm than good.
If you can't shift it, don't worry about it.
 
It's on the focusing screen, ignore it.
Sensor dirt is another issue altogether but screen dirt should be ignored.
 
Back
Top