In the past, I have managed to successfully fire my SB600 remotely off camera by using 'commander' mode.
After setting the sb600 to work remotely on channel 1, group A, the camera has been set to pop up flash --, group A to manual 1/1. There is only one flash so no need for group b. Channel has been set to 1 for both camera and flash and both set to group A.
The issue is, to fire the remote the camera pop up needs to be raised. Strangely, despite the above settings, the pop up is still firing. Any clues on what I could be doing wrong would be much appreciated.
Thanks in advance
Jas
After setting the sb600 to work remotely on channel 1, group A, the camera has been set to pop up flash --, group A to manual 1/1. There is only one flash so no need for group b. Channel has been set to 1 for both camera and flash and both set to group A.
The issue is, to fire the remote the camera pop up needs to be raised. Strangely, despite the above settings, the pop up is still firing. Any clues on what I could be doing wrong would be much appreciated.
Thanks in advance
Jas