Quick survey: What will I do if my analog camera has a problem?

If my analog camera has a problem ...

  • ... I'll have it repaired.

    Votes: 4 28.6%
  • ... I try to fix it myself.

    Votes: 6 42.9%
  • ... I'm selling it for spare parts.

    Votes: 1 7.1%
  • ... I dispose it.

    Votes: 4 28.6%
  • ... see my reply in the thread.

    Votes: 5 35.7%

  • Total voters
    14
Messages
115
Name
Andreas
Edit My Images
No
IMG_9463.jpeg

There is a large market for used analog cameras of all formats. But when problems arise, you have to decide how to deal with them. In most cases, manufacturers no longer offer service. That leaves repair shops, do-it-yourself options, selling them as spare-part units, or disposal.

I'd like to find out which of these options you prefer. Or are there other options if an analog camera stops working?
 
Last edited:
Depends on what the camera is worth. Over about 20 years must have thrown away (if I couldn't fix them)....... about 20 cameras as I picked them up for peanuts so no loss and I had/have plenty of cameras to use anyway without them as I have about 40 left.
 
It's not quite so simple. I still have a couple of cameras bought in the 1980s. If my Minolta 7000 goes wrong then it's for recycling, but I'd consider getting my Bronica ETR repaired.
 
Potentially all of the above depending on which camera and what goes wrong with it!

Had a dynax 7 with aperture failure. Tried to get that repaired but sold it for spares to the repairer.
Others I have had to return to the shop I got them from as they failed within the first few months. Had that happen twice.

Ebay buys that fail then there's usually not much you can do.

So far my solution seems to be buy plenty and use them all regularly but carefully. Then see which are left standing. I have several dynax SLRs so potential for scavenging one to save another if two fail with different issues.

Most failures unless it's a dirty battery contact are beyond my fixing skills....
 
The backup of the backup of the backup ... :p
:Da lot of them are joe public cameras and no leicas, I'm a lens man and years ago hunted the hidden gems (when they were cheap).....so I have a good collection of VG lenses and all the ones that I tested that I wasn't happy with went into the bin. But in saying all that, recently bought two lenses that weren't cheap :oops: :$ that I wanted to try 17mm Tokina and Tamron SP 60-300mm and got lucky for the Tokina as did a quick test and it looks sharper than my 19mm and 20mm Canonso_O
 
Last edited:
In sixty years and couple of hundred cameras, I've only ever had one camera repaired and that was a Rolleiflex 2.8E, the repair being done under guarantee.

I still wince when I remember how Royal Mail managed to lose the seller's return parcel for eight weeks, even though it was Special Delivery!

Leica and Rollei from right.jpg
 
If the camera is fundamental sound, (which is why I bought it in the first place?) then I do not mind having it repaired.
Lenses and shutters are the bugbear for me, I am tending away from older shutters that no one knows how to mend, for that reason and trying to buy more modern shutters.
I find hi end Nikon cameras remarkably durable but try getting an F100 without leaky displays is like looking for gold in a Welsh river.
 
Yes, all of the options depending on circumstances.

If it looks simple enough I might do it myself. RF calibration or cleaning maybe.

Or if it's beyond me looks like something a repair person could fix (and I can find one who gives me the sense they know what they're doing) I'd send to a repair place.

There is a cost/benefit issue sometimes - what to do about things you can buy for far less than a CLA cost. So sometimes, things get sold off rather than repaired.

With repair shops there's the question of customer expectations for those of us not using them routinely. What is the foreseeable repair cost? Will the repair firm quickly get to the bottom of the problem and advise accordingly or will they be potentially spending your money on repeated and failed attempts. Will they hold onto your gear for 6 months while they wait for a parts camera to appear (and more importantly will they tell you up front or do you have to repeatedly quiz them until they admit that's what's happening). And will they advise you sooner rather than later if a repair isn't really possible.

I think I've only ever sent 4 things off for repair. Two were simple, efficient, enjoyable experiences done quickly... a third was a bit slow (6 months!) but ultimately came through and the camera worked perfectly thereafter... the fourth was an expensive waste of time and money and the camera never worked properly... ultimately sold that camera for spares/repairs...
 
For me, buying cameras used to be stressful, as was collecting them, because I was constantly worried that something might break.

For a while, I employed two professional repairmen. That cost a lot of money, and I lost trust in one of them. Then I learned to do my own maintenance and repairs, and I’ve found peace ever since.

Over the past few years, I’ve bought up a number of SLRs in more or less unknown condition. They’re now stored in boxes, cataloged by index. Each one is a potential service or repair project; I’ve already worked on most of these camera models and posted repair reports on forums. I’m continuing to do that now.

IMG_6053.jpeg IMG_6052.jpeg

Only my lenses worry me, because opening each one to clean the elements or the aperture—especially on zoom lenses—is an adventure. The problem isn’t fungus, but the outgassing of lubricants mixed with condensation, which forms a film on the lenses. Or zoom and Canon FD lenses whose slide bearings are falling apart.

Technical documentation on lens service and repair is available, but instructions are rare. In that case, you have to take the risk of figuring out how to do it yourself. That’s not always the kind of entertainment you’re looking for to relax. For rare and expensive lenses, I seek out specialists, even if its expensive.
 
Last edited:
A while back, I used the autocollimator to check whether several lenses were correctly adjusted to infinity. I was in for a few surprises.

It’s relatively easy to get them to the correct setting, but you have to figure out which screws to loosen for the adjustment. The method for doing this varies somewhat from lens to lens.

Zoom lenses are more difficult to adjust—once for the shortest focal length and once for the longest.

IMG_6050.jpeg IMG_6044.jpeg IMG_6051.jpeg IMG_6040.jpeg IMG_6046.jpeg IMG_6039.jpeg

See

Reveni Labs Autocollimator: Olympus OM Zuiko 65-200/4 auto zoom set to infinity
 
Last edited:
I've had a number of Pentax SLR's CLA'd which has restored them to use. I have a couple of old rangefinders that need TLS, a Leica iiic and a Contax T2, I just need to get around to finding the right repair shop and dealing with it, but as I'm not a fan of using rangefinders, I may not bother and keep them as nice things to look at. I bought a Pentax 645 a few years ago and was shafted by the bay seller, as the electronics are knackered and without that the camera is unusable, but I do want to try just cleaning all the contacts (including a messy battery holder); if that fails, it has a good lens on it which may come in useful on another camera - maybe one of Chroma-Steve's contraptions.
 
****For rare and expensive lenses, I seek out specialists, even if its expensive***

Well I've tried and you can't find one in the UK as no one wants to check my Canon FL19mm f3.5 R as some parts of a shot are out of focus, even asked a popular repair guy could you just check all the elements are in correctly...and he wasn't interested:( DIY well I have the layout for elements but......................................................
 
Generally speaking, I'll have my "proper" cameras (eg the Pentax SLRs) repaired if they develop a problem. They deserve to stay alive. If the problem recurs, it's probably time to let them go (I think I'm up to no 4 in my Pentax MX sequence). I've more problem with AF AE cameras like my Olympus mju II; I think it would probably be hard to find someone to repair those!
 
For me I'm not so bothered by the cost. If I consider a camera is worthwhile, I will more often than not have it serviced. And, by worthwhile I mean important in their way. Not necessarily as prized collectors items, but as practical things that were a pleasure to use, and by that criteria I would rate a Pentax Spotmatic as being on a par with more niche models.
 
Back
Top