taking pics of people wearing glasses

Messages
1,318
Name
Matt
Edit My Images
Yes
hey peeps,

just after some pionters of how to control the reflections on the glasses of someone.


is there something special to be done? or is there nothing to worry about?
will mainly be using fill flash on the shoot

cheers in advance.
 
Im no expert but some sort of filter might be in order, Im sure someone will know the exact answer on here :bonk:
 
I can't remember if it's long light or broad light that minimises glasses reflections whilst shooting portraits.. but one of them works. Modern anti-reflection coatings also work if the subject has these applied to their glasses.

Had a look around and you should read this article on Strobist.. .
 
Off camera flash to one side, maybe arms length to one side. This will bounce the light away from the lens. Some sort of diffuser/soft box to lessen the harsness, try tissue paper over the flash. If possible, bounce the flash from ceiling or wall. Or simply ask the model to tilt glasses slightly down, this may take a little trial and error.
 
Angle of {light} incidence = angle of reflection

i.e. you need to make sure the light is coming from an angle doesn't bounce back towards the lens. It should not be too difficult to work how to place your lights

Alternatively, in the old days people used to use empty frames!
 
Angle of {light} incidence = angle of reflection

This.

If it's in a studio, sometimes the easiest thing is to simply lift the lights rather than change their angle, as it will also obviously change the lighting. If it's on the fly and you're using an off-camera flash, then just change the angle.

Polarising filter will work too, but don't forget that you'll lose light. :thumbs:
 
A polarizing filter may help with reflections

I thought that.
A polarizing filter is excellent at removing sun glare from a lake or river.
So I would imagine that the same result would be achievable from reflections off of glass.
I could be wrong, and I probably am. :|
 
I thought that.
A polarizing filter is excellent at removing sun glare from a lake or river.
So I would imagine that the same result would be achievable from reflections off of glass.
I could be wrong, and I probably am. :|

You're not wrong at all. A polarising filter works by removing all light in a set plane, imagine the surface as being like a set of blinds. As specular reflection is in one plane (going back to AI=AR), a polarising filter will work. However, because of the way it works (by removing light in that plane), you're effectively losing 50% of the light allowed onto the sensor, so you have to adjust your exposure accordingly. :)
 
Back
Top