advice please for shooting a lot of products

Messages
802
Name
Dave Peacock
Edit My Images
Yes
Hi all,
Wasnt sure where to post this so i went for basics as im new to the forum and it covers a few areas...

I have got the contract to photograph around 3500 individual bolts of fabric for a fabric shops online catalogue.

I have a Sony a200 with 50mm 1.8F, 18-70 (stock lens), 18-200 tamron, i have a decent flashgun and tripod.

What i was hoping to get help with is the best way to go about shooting all the fabric? There is a large work bench in the stock room, i was thinking of placing a large white board on this, with another large white board as a background. then mounting the camera on the tripod and shooting the fabric using the flashgun.

Would this be a good enough option? or would i need to buy extra lighting? if so are there any recomended budget setups? (wont be using this lighting much in life) are any of my lenses good enough?

First time ive ever shot products so any advice would be great.

Examples of how the products will look once cropped are:

3500 products to be shown like this;
p%5Chaq%5Cffa%5C3212fabric350.jpg


then some random extra pictures for use on the site;
fabric_packs0309.jpg


CLX1005Quilt009-de.jpg


Fabric-Bolts.jpg
 
Oh, also another question, is it possible to link my camera to a pc? so that as i take each picture it could go directly into my laptop to be quickly edited and re-named?

Thanks :)
 
not sure about linking the camera to the pc, but if you use photoshop, you can set an action up to 'batch' crop, resize and save images to a new folder, then you'll just have to label them accordingly i guess.
 
yeah that would be the other option i would use if i had to, i love my actions folders.
but each fabric bolt has a number on the bolt itself, so it would make it much easier for me to change the picture name as its shot rather than trying to figure out which is which.

If not, easiest option will be to shoot them in catagories, cropping and renaming in batches.
 
can you not take a picture of the product number with the sample (say if it comes on a small card or tag for instance) then when you load the image, file save as "[product number]"(as it will be on the screen in front of you) then run the crop / resize action to cut off the code part and leave a nice square sample image. resave, job done.

providing the product codes are small enough to include on the image somewhere
 
I have had a lot of experience around photographing fabric.

Somthings tyou may wish to consider:-

if your images are going to reproduced in a magazine or a catolouge you will need to have a least:-

High quality colour corrected monitor and remind the client they will need tha same

An understanding of what file size / colour format/ file format is needed by the publisher.

A very stable colour source in terms of flash , you cannot shoot fabric in daylight and get consitant colours.


I have seen professional photographers literely pulling out their hair as the client bounced one tranny after another saying that the colours on the film did not match the fabric .

It may be better to use a high quality scanner than photgraphing then.
 
Back
Top