Bit of help with my 7D please - colour fringing :(

Messages
202
Name
Leanne
Edit My Images
Yes
I recently got a Canon 7D, which I love to bits. Something is bugging me though... I'm getting an awful lot of ugly colour fringing around the highlights. It's happening with all of my lenses (except the 10-22mm - which I haven't tried with the 7D yet!)

Here's an example from today, nothing special - just a snap:

_MG_3314copyrs.jpg


Here's the problem I'm talking about:

Untitled-1.jpg


Okay, I know it's zoomed right in and even beyond 100% but that's purely to show the problem clearly! :) The shot above was taken with the kit lens from my old 400D (18-55mm). I've noticed it with the Canon 55-200mm f/4.5-5.6 too though when I was taking photos of ducks, there was fringing around their beaks. Also with the Canon 50mm 1.8, I took some images of flowers and they were on the highlights on the water droplets.

Is it the settings I'm using? I realised afterwards I could've done with narrowing the aperture in the one I posted as the details are quite soft. Is that the cause of the fringing in that case? :bonk:

Edit: I should add, I never noticed this problem with my 400D, only around details against a completely blown sky.

If anyone has some advice on this, I'd appreciate it!
 
Last edited:
It's called Chromic aberations and is down to your lenses.

The 7D is an awsome bit of kit but it will show up every flaw in your lenses.
The effect I believe is caused by the way the light travels through the glass and is distorted.
Much like when you pass white light through a prism it splits the colours.

Thers not much you can do about it other than look to the future and upgrading your lenses. The cheaper end lenses ( kit lenses ) are built to a price so tend to have these abnormalities.

Try you 10-22 I had one and it suffered no noticable CA.
 
DPP can get rid of it effectively in raw files.
There's a tab on the tools pallete labelled 'NR/lens', and click lens abberation correction: [TUNE]. The CA removal tool in that gets rid of colour fringes very easily.

I'd hardly call that 'an awful lot' of fringing. It's only a couple of millimetres at 100%, and you have to bare in mind that at 18mp, that would be an absolutely HUGE print. You would really have to stand close to see it.
 
Last edited:
DPP can get rid of it effectively in raw files.
...
I'd hardly call that 'an awful lot' of fringing. It's only a couple of millimetres at 100%....
Thanks Adam, I'll give DPP a go. I know I'm being very fussy! :lol: It's not so bad in that photo, the close-up of the duck would've been a better example but it was so bad, I trashed it :)

Does it persist if you stop the lens down to say f8 or 11?
Only wish I tried that when I was there, I don't think I was thinking at all when I ended out using such a wide aperture for a shot like that.

It's called Chromic aberations and is down to your lenses.
...
Try you 10-22 I had one and it suffered no noticable CA.
Thanks for the input Chris! I had my suspicions about the lenses. I'll give the 10-22 a try next time I'm out and see how it goes.
 
Aperture was f4.6, and you're seeing that CA more because it appears more in out of focus areas, and at f4.6 you dont have a lot of dof.

Lenses typically display most CA at widest apertures, even in in focus areas. Try my Tokina 25-50mm wide open or f5.6 - you'll be shocked! Good job I use it on B&W film only!
 
Having looked at your camera back it looks to me like you need to invest in some higher quality lenses.
Sorry to say this but apart from your 10-22, the 7D will punish these lenses and the CA issues with your photo is no surprise to me.
I firmly believe in the rule of thumb that it's better to invest in lenses before upgrading to a higher end body.
 
Last edited:
I firmly believe in the rule of thumb that it's better to invest in lenses before upgrading to a higher end body.

Yes, without a doubt.

I've met plenty of competent photographers using low-end bodies, who could easily afford to buy any camera they desire.

I've also met plenty of incompetent photographers using EOS 1Ds, because "you have to look the part". :shake:
 
DPP will fix CA, or improve it a great deal. It also fixes distortion and vignetting, and you'll have plenty of all three with the non-IS version of the kit lens that was sold with the 400D. The later IS version is much better.

You also need a later version of DPP than was sold with the 400D, though the version with the 7D should be fine (or you can upgrade free).

Good examples of DPP at work here with a Canon 17-85 http://www.dpreview.com/lensreviews/canon_17-85_4-5p6_is_usm_c16/page3.asp Scroll down to the shots of Tower Bridge.
 
I'll keep in mind that wider apertures (which I shouldn't have even used in that shot) can cause this to be more apparent. :bonk:

Thanks for that link Richard, excellent results! I'll look out the version I got with my 7D and give it a try.

I firmly believe in the rule of thumb that it's better to invest in lenses before upgrading to a higher end body.

I understand, and I agree. :) I was swithering between going for a new lens rather than the 7D but I'd had the 400D for quite a while and I noticed that occasionally, it began to have trouble recognising my lenses. It could've been repaired but how long 'til something else went wrong? I worried that I could end up spending a small fortune on keeping it in good nick. I decided to buy a new body instead and I went for something that I could really grow into.

I'm absolutely delighted with this camera and can honestly say that I'm not one of those using it as an accessory to "look the part". I was sold on it from when I first tried it out. I love the solid build quality, the controls and I'm finding new features all the time.

From what I'm reading, I can see that it won't reach its full potential until I get some better lenses...so guess what I'm saving for now? :thumbs: In the meantime, I'm very happy with what it can do. This has been my only qualm so far.

Thanks all for the advice! :wave:
 
Last edited:
Back
Top