sk66
Advertiser
- Messages
- 8,678
- Name
- Steven
- Edit My Images
- Yes
I have the Godox AD200 round head and the AK-R1 accessory kit. I bought the round head so I could use the kit; I also have the adaptor that allows me to use the kit on my speedlight as well. And I bought the kit primarily for the barn doors, grid, and snoot (and because it was all rather inexpensive). Unfortunately, the snoot is both too short and too wide to really be of much use IMO... so I found a cheap/easy solution. It's a $16(US/delivered) adjustable iris that opens from 1.5mm to 23mm. The key is that the snoot has a 35mm inner diameter, and the iris has a 37mm outer diameter; it's a nice snug fit.
Now that is useful!
I suggest you DO NOT attempt to glue it in place; if any glue seeps into the mechanism it will be ruined... yeah, I wound up buying two of them . Besides, metal and rubber don't really glue together very well.
(If I were to do it again, I would probably install it with the other side facing out and simply cut a slit for the lever to stick through, rather than relieving the front edge like I did)
Now that is useful!
I suggest you DO NOT attempt to glue it in place; if any glue seeps into the mechanism it will be ruined... yeah, I wound up buying two of them . Besides, metal and rubber don't really glue together very well.
(If I were to do it again, I would probably install it with the other side facing out and simply cut a slit for the lever to stick through, rather than relieving the front edge like I did)
Last edited: