Camera doesnt seem to want to take photo's with new lens? STILL NOT WORKING?

Messages
80
Name
Elliott Brockett
Edit My Images
Yes
Recieved my new lens today for my Canon EOS 20D. The lens is a Tamron 55-200mm lens.

When i put it on the camera it kinda like focus's but doesnt seem to actually want to take any pictures, i hold my hand down on the botton but nothing happends then i put my standard lens on and its fine?

Im a noob too, so sorry if its something silly im doing.
Thanks
 
First guess is what are you trying to focus on?

Lens / Camera needs a bit of change in colour / contrast where the focus point is aimed to get autofocus to work.
 
I went outside, tried to focus on my car, nothing happened couldnt take a photo, did a few ones in my bedroom and kitchen and still nothing?
 
You have switched that lens to autofocus I presume and its not on manual??

*SNAP* TO THE POST ABOVE!!!
 
It's definitely set to autofocus, not manual?
 
So the picture focuses and goes sharp.... but the camera wont take the photo. is it something to do with AI servo or something whereby it wont take if it isnt correctly focused? Cant remember exactly.
 
With my standard lens i turn the camera on hold down the buton half way down and it focus's....this doesnt
 
Yeah it takes pictures on manual focus
least i know its working!
 
Are you using ONE SHOT or AI FOCUS or AI SERVO on your camera?

One shot will not let you take the photo unless it is properly in focus.
AI SERVO will take the shot whether in focus or not.
 
One shot it was.

See my edit above. If the green light comes on as focused it should take. You will need to check if the light comes on and it focuses first.
 
Let me just get the camera out etc and check this.
Thanks
 
Did you get any instructions with the lens? I know some Sigma lenses have a little slider that needs moving/locking in place for certain types of camera. Not sure if Tamron are the same?

Check the contacts are the same as your standard lens. Are you sure it's for Canon and not another make of camera?
 
A focus limiting switch I think it is. For focusing close up without it hunting far away.

As said before, Elliot, try to focus on the edge of a fence or something with a defined edge. Use the centre point and get that on a sharp edge. Foliage, fur even the blank paintwork of a car may not work.
 
You're taking your test shots in good light with a wide aperture? A lot of AF won't work in low light.

AF mode on lens - should be right
one-shot mode - should be right

Are the lens and it's contacts clean?


Hmm, not sure what else to suggest!
 
Ive only had the camera a day so let me jus see how i change it to AI SERVO
 
Did you get any instructions with the lens? I know some Sigma lenses have a little slider that needs moving/locking in place for certain types of camera. Not sure if Tamron are the same?

Check the contacts are the same as your standard lens. Are you sure it's for Canon and not another make of camera?

Didnt get anything but it says for canon.
 
Ive only had the camera a day so let me jus see how i change it to AI SERVO

I wouldnt. That will let you take the photo regardless of whether its in focus or not. I think we need to establish if it is getting in focus or not first...... so perhaps leave it on ONE SHOT while you are testing.
 
Just took a picture with AF on it flashed up... Err 01
 
Err 01 is incorrect communication between the camera and the lens.

Try removing the lens and cleaning the contacts on both the lens and the camera
 
What do i clean them with? contacts the gold metal like pins?
 
Different people use different things, some people suggest alcohol wipes but these can damage them (apparantly), others say just use lens cloth or tissue.
 
Is this a new lens Elliott or secondhand. If it's an older Tamron lens then the firmware may not be compatible with modern DSLR bodies.

Bob
 
IS THE LENS COMPATIBLE WITH THE 20D?

i vaguely remember hearing that the ef-s lenses arent compatible with some older cameras and this is designed for an aps-c sensor size:shrug:
 
IS THE LENS COMPATIBLE WITH THE 20D?

i vaguely remember hearing that the ef-s lenses arent compatible with some older cameras and this is designed for an aps-c sensor size:shrug:

The 20D's fine, it was the 10D that wouldn't take EF-S.

Bob
 
will the 10d take the sigma/tamron lenses designed for aps-c sensors?
 
It was a second hand lens.
If its not compatible would it not completly work though?
Its working a little. on manual focus it did
 
Had same thing with Sigma 70-300.
As said before-the firmware wasnt compatible.
I could have got it re-chipped by Sigma.but the cost of doing so was close to the lens cost...So ended up just buying the newer version designed for DSLR.
Got a feeling is same issue here...
 
Back
Top