Can someone explain metering to me a bit more please?

Cris_L

Take That's Biggest Fan
Messages
1,923
Name
Cris
Edit My Images
Yes
I'm really struggling to get my head around metering. I get that its measuring the light to get the correct exposure but HOW do we do it with our cameras and when does it happen during the process of taking a photo. does the camera produce a set of figures for us to work with or does it automatically put them into the camera?

sorry i know this is basic stuff but I just can't quite get my head around it...I read the thread in the general forum about the guy metering his hand and got really confused! :bang:
 
When you point your camera at a subject it will measure what it thinks to be the correct light reading and expose for the film or CMos sensor and alter the cameras setting accordingly depending on what mode you've placed it on.

It will measure the amount of reflected light off the subject. Modern cameras are good at determining most "average" subjects, they generally only fail at working out the exposure correctly when the subject is very dark / very white or very high contrast or very low contrast. this is mainly due to the average subject reflecting a similar amount of reflected light to an 18 percent grey card.

Experience will help you to point the camera at the right part of the subject to take a reading that will give you the correct overall exposure.
 
Ah ok, thats made it a bit clearer, thank you. So I assume if i was in manual mode I would have to set the settings myself, in Av the camera would set the shutter based on what metering reading it took in conjunction with what aperture i set....?

thanks for the help
 
Pretty much, if you're not sure about anything just ask away. There's always at least one person willing to help
 
in Av the camera would set the shutter based on what metering reading it took in conjunction with what aperture i set....?

thanks for the help

correct, metering can be a bit problematic if conditions are in extreme, by that i mean areas bright and areas dark, some say it is best to exspose the light areas as you can always pull the detail in the dark areas back during processing, but blown areas are almost impossible to get back
 
Last edited:
Iam no expert myself I am still learning but my understanding is that...Hope Iam getting this right :) (assuming in M mode)

Metering the palm of your hand is just a way of calibrating your camera meter manually to a middle tone value. The thinking is that the palm of your hand is suppose to be 1 stop tone brighter than middle tone so you will have to increase exposure by 1 stop to compensate to get it to a middle tone value.

The reason for middle tone is it will give you more latitude to cover the highlight tones and the shadow tones in the picture you are taking.
 
Last edited:
There are two aspects to it.

Exposure metering is the first bit, measuring the brightness of the light. This is where you choose evaluative/matrix or spot or whatever (or the palm of your hand) to help you get the most accurate measure.

Then there is exposure setting, which is the business of converting the light reading into a combination of camera settings - shutter speed, lens aperture and ISO. This is when you choose Av, or Tv etc according to creative preference.

If you use a hand meter, the two operations are completely separate, but with integral metering they are effectively done together and simultaneously by the camera.
 
Back
Top