"Focus on Infinity"

Lynton

awkward customer
Messages
10,606
Name
Lynton (yes really!)
Edit My Images
No
Sorry for a "numpty" Q - however if you don't know there is no such thing as a numpty Question.

Was out the other night in pitch black and trying to get the lens to focus on a specific object using a torch to light and focus, but failed miserably.

Here's the evidence.


stbenetsx.jpg


Then sitting here tonight reading a Photography mag that dropped through the door today, a pro, in a similar situation, though admittedly going for star trails with a boat on the beach in the foreground commented "I try to focus on the subject using my torch (as I did), but sometimes I struggle to do this. (As I did.) If this is the case then I set my focussing to infinity, which usually gives me a sharp picture."

OK, I understand what Infinity is and where it is on focussing on a lens, but how does focussing on infinity ensure (usually?) that an object in relative close foreground (only a few metres away) is sharp?
 
it doesn't, focussing on infinity ensures stuff far away will be in focus (if using a small aperture)

does the lens have a distance scale on the focussing ring as I tend to get ball park using that and a torch which is usually close enough at small apertures
 
david - thanks for the reply - no it doesn't. Is a siggy 17-70 for Pentax.........

Indeed - obviously infinity is a long way away, so do I assume that focussing on infinity and a small ap . I.e. F8 or more gives a DOF long enough to get the foreground interest in focus on a long exp, or am I needing a torch which will need me to wear sunglasses in total darkness????
 
If the cross in your photo is only a few meters away, did you try propping your torch up against the cross and focussing on that, rather than trying to illuminate the cross to focus on?
 
if your lens has an aperture scale - set infinity to the aperture you are using (on the left of the focus mark, as seen from above the lens when on the camera) - this will give you the greatest possible DOF
 
You need light to focus, at least a little, both with auto-focus or manually. There is no getting away from that. At close range a torch may do, or maybe the red AF assist light from a flashgun - somehting like that.

If there is no light, you have to guestimate, and try to cover any error with the extra depth of field you get with a higher f/number. That would be my suggestion for the picture you posted - shouldn't be too difficult, perhaps at f/8-11 or so.

A bit of learning is in order I'm afraid. Check out www.dofmaster.com which will give you depth of field for any combination of lens, camera, distance and f/number. Also get to grips with hyperfocal distance focusing too.
 
Back
Top