Godox sl60ii BI

Messages
9,330
Name
Paul
Edit My Images
Yes
I've been looking at the possibility of getting one of these for table top and occasional product photography.
So basically looking for any thoughts, both positive and negative, to help me decide.

TIA
(y)
 
It's an OK product, but why do you think that you need a variable colour temperature continuous light for this purpose? Flash is far better, won't be affected by ambient light levels.

Basically it's a decent video light, marketed as a one-stop solution for all kinds of photography
 
It's an OK product, but why do you think that you need a variable colour temperature continuous light for this purpose? Flash is far better, won't be affected by ambient light levels.

Basically it's a decent video light, marketed as a one-stop solution for all kinds of photography
Thanks, Garry.
Thy do one which is daylight only, but not much cheaper though.
I just wanted a continuous light, so I could kinda get to almost there ish. I only have flash guns. So can be a bit of a long winded route using just them sometimes. My intention would be to use both.
 
Yes, from memory, one or two Godox flashguns that you've done incredibly well with, and you also have a neocrap.
IMO your natural progression is to a studio flash. You're in first gear, go into 2nd, not reverse:)
 
Yes, from memory, one or two Godox flashguns that you've done incredibly well with, and you also have a neocrap.
IMO your natural progression is to a studio flash. You're in first gear, go into 2nd, not reverse:)
:ROFLMAO:
at neocrap (I agree). Hence the reason for a continuos light, that I can use in conjunction with the flash guns. Studio flash would be too expensive.
 
You can buy a used but working Elinchroma D-lite for £50 - £60. I just bought a used, older Prolinca flash (same reflector, brolly & sync lead fittings as Elinchrom) for £29 post paid.

(I photgraph stuff I want to sell on ebay. Good photos help! In summer I use daylight, with a reflector if I need fill. In winter I use flash.)
 
I have 4 of the Godox MS300 studio strobes and they are a good place to start with Studio Flash. The SK300, which I also have, are slightly longer and slightly more expensive, but seem a little better made to me, although in about 5 years of use I have had no troubles with either model. Both have modeling lights, are mains powered, have Bowens mounts, and the tilting bases have umbrella holders. All studio lights have 5/8" sockets in their bases for mounting to light stands. All use the Godox "X" communication system and have the receivers for the X System built-in, along with infra red and sync cord triggering capability.

In use for portrait and product "Still Life" photography they have more than enough light output whether they are used with just a 7" reflector or a soft box. There won't be many times when you will need more than about 50% of their 300 w/s output power for this type of photography. My home studio is in a repurposed former 2nd master bedroom suite upstairs in my home. Most of the shooting that I do now is this type of photography, because I am 85 and no longer very steady on my feet. For trip hazard safety I installed mains power strips about 10' apart running from behind my usual camera location all the way to each side of my 10' wide backdrops. There is a power outlet every 6" along each of these so lights can be most anywhere. Most lighting and stand locations are under or near these power strips, so the power for the lights comes from above and not from cables running on the floor, significantly reducing the trip hazards in my studio.

Charley
 
You can buy a used but working Elinchroma D-lite for £50 - £60. I just bought a used, older Prolinca flash (same reflector, brolly & sync lead fittings as Elinchrom) for £29 post paid.

(I photgraph stuff I want to sell on ebay. Good photos help! In summer I use daylight, with a reflector if I need fill. In winter I use flash.)
Second-hand is a very good option. The Elinchrom D-lite is excellent, but perhaps not the more basic Prolinca, the only problem with that make is the modifier fitting, Bowens S-fit is so much better IMO.

Personally I bought a Lencarta SmartFlash 3 (best model by far) and a couple of really old Bowens flashes on eBay, all for absolutely bargain prices, all built for hard work and long life and far better made than current choices.
 
Thanks for all the input, and thoughts guys. I really appreciate it.
Now thinking about the godox 300 v which is on sale at the godox website.
 
I've been looking at the possibility of getting one of these for table top and occasional product photography.
So basically looking for any thoughts, both positive and negative, to help me decide.

I have a Neewer equivalent.

Downsides compared with flash - light output, you get some heat, you can't control as much, heavier battery.

The upsides - it is its own modelling light, you can change the colour with a dial, you can use it for video.

I also had an odd use. Outdoor I can place it outside flash trigger range to illuminate something distant from the camera in darkness - set it up and leave it on while I walk back to the camera to take the shot and illuminate stuff that is in range using flash.

I know one established photographer who uses an Apertur continous setup for documentary work in part because of video and in part because its easier to work the lighting when using film.

Would I use on for table top or product? I think it depends. When trying to deal with photographing reflective surfaces and needing to set up small reflectors then I would give it a go. But when I have used my continuous lighting indoors for studio style portaits I have tended to darken the room because you don't have the same ability to dominate the ambient room lighting.

So a lot of the time flash just works out better.
 
It helps to raise the F-Stop setting when taking photos indoors, to just high enough to remove the ambient light level from affecting the shots. Then, only your flash and the flash levels, or your continuous photo lights and their levels, will affect the shots. I do a couple of "Test Shots" with no flash or continuous photo lights lit and only the "Work Light" lit to find this F-Stop setting. For me in my studio with the ceiling "Work Light" on, the F-Stop setting of F-8 is usually what works well and I can then set the flash or other brightness settings of the photo lights to get the needed exposure, but it can be different if the ceiling light reflects off a shiny part in/on the subject. If this F-Stop setting can't be used because it makes the Depth-Of-Field too short for the desired shots, then the "Work Light" in my studio needs to be turned off during the shoot.

I have added wireless switches to each of my camera stands, my computer desk, and the wall location at the door where the original ceiling "Work Light" switch had been located, so I can switch this ceiling " Work light" off, take the shots, then switch the light back on without the need to move around in the dark. Life in my studio is much safer this way. I do this F-Stop test with no photo lights working at the beginning of every photo shoot. Once I get a totally black "Test Shot" I can resume my photo shoot with the photo lights or flash turned back on. Any F-Stop setting above this is acceptable, but you will need the light off to use an F-Stop setting lower than this satisfactory F-Stop setting. This is the only way to have full control of the exposure of your indoor shots and still be able to move around in the low level constant room lighting without this low level lighting affecting your exposure settings, but it sometimes becomes necessary to work in the dark, if the F-Stop setting needs to be lower than what is required to block the low level constant lighting..

Charley
 
Last edited:
First try... Bit of pp and a cheat to move the split over a tad.
 
Back
Top