HELP PLEASE! Why are moving subjects blurred in my pictures??

Messages
49
Edit My Images
Yes
Hi,

I am new to photography and have found this forum excellent for advice. I have a canon 450d XSI. Last week I took some pictures of friends in a pub, I used the monochrome setting to shoot black and white and the light in the pub was relatively low although not too bad. I found that when my friends were sat still the pictures were ok however as soon as they moved the camera picked up the movement and they just became blurred.

Why are the subjects all blurry as soon as they move and what can I do to stop this?

I was hoping to be able to photograph moving people without them being blurred.

As much advice as possible would be appreciated, thanks in advance

Cheers

Danny
 
The simple answer is too slow a shutter speed.

As the level of available light was low the solution would be flash or increase the ISO. I'm not sure what the range of your DSLR is but I'm sure someone who knows will be along soon.

Can you post the photo with the relevent exif info?

Ken
 
Your shutter speed is probably too low. Are you shooting on auto? You need to keep the shutter speed above about 1/160 for moving subjects to avoid motion blur. Even faster if they are moving quicly, for example sports. Best way to do this is to shoot in manual where you have full control over all your settings. However with your camera will probably struggle in low light because you might need to use a fairly high ISO and will end up with grainy pictures.

H x
 
Erm! its not a video camera so you cannot capture moving people on a still image. Do you mean that you are taking still photographs and you expect the people in the photograph to be sharp even if they were moving at the time you pressed the shutter. If the latter then you are using a slow shutter speed because of the low light and any movement will be picked up (you will need to use at least 1/60 of a second no slower ). Use the built in flash. If you are using one of the creative modes on the 450D e.g. Aperture or shutter priority you have to activate the flash manually using the small flash button on the left side of the body/lens collar. your best bet however is to go to one of the basic modes like portrait for instance and the camera will do all the work for you.
 
If you post an example with EXIF intact we can see the settings used on the shot and possibly offer some advice
 
Hi Guys,

Thanks for the speedy replies. I am at work and unable to post any of the pictures right now. The general consensus of opinion seems to be that the shutter speed is too low and I therfore need to increase shutter speed manually and maybe apply the flash also.

I have been looking at buying the 50mm lens as this has previously been recommended as a good lens to use in low light.

I will try again manually increasing shutter speed and applying flash and hopefully this will solve the problem

Thanks again I really appreciate it

Cheers

Danny
 
Manually increasing shutter speed and using flash will not guarantee good results. You have to take into account flash sync speeds/exposure/coverage etc (Dont ask yet,:thinking: it will just confuse the issue for a beginner). Best advice use the basic zone settings till you are more comfortable with exposure settings and camera controls. Try here

http://www.cambridgeincolour.com/tutorials.htm

Ignore the first one about sensors, that should be in a different section. I dont understand why they put that first,if I was a novice that would scare the heck out of me and I would read no further.
 
Last edited:
Back
Top