I want to print all of my picture

Messages
118
Name
Lorraine
Edit My Images
Yes
Hi all
Not sure if I've posted this in the correct place but mods feel free to move - Please can someone tell me if it is possible to get a complete photo printed a certain size. If I was to print it from my computer I could do it, but the quality is not good. So having taken my photos to my local shop, I have today had pictures printed at 6 x 8 and 8 x 10 but a piece of it was clipped off at one end. When I mentioned this - I had a choice of where the photo was cropped, but it had to be cropped. If I wanted the complete picture I would have a white band at the top and bottom. Why is this? Is it anything to do with my camera? Does this mean I cannot get standard - 6 x 8, 8 x 10 photos showing everything I see through my viewfinder? Is it me? :shrug:
Lorraine
 
your camera shoots pictures at a ratio of 3:2 - so to get the complete picture printed you have to choose a paper size of the same proportions - e.g. 12x8 or 15x10 or 9x6 otherwise your picture will be cropped - as you have discovered.
 
if you have photoshop, you can go to 'image>resize>fit to canvas' and this should allow you to fit the whole picture onto the paper.

hope that helps :)
 
Its to do with the image from your camera. Most photo labs require require you to size your images for printing which you can do in your photo editing software

My 20D camera creates images 3504 x 2336 pixels so I would need to crop that image down to fit 6x8 or 8x10 image so for 8x10 my image is now 2817 x 2254 pixels which you can do using you edit software.

What camera and editing software do you have?
 
if you have photoshop, you can go to 'image>resize>fit to canvas' and this should allow you to fit the whole picture onto the paper.

hope that helps :)

not true - not without distortion - it's about ratios - the DSLR format is approx a 3:2 ratio - so to print the entire picture you must retain that ratio - OR crop the picture - OR distort the picture to fit (NOT recommended!).
 
Last edited:
Its to do with the image from your camera. Most photo labs require require you to size your images for printing which you can do in your photo editing software

My 20D camera creates images 3504 x 2336 pixels so I would need to crop that image down to fit 6x8 or 8x10 image so for 8x10 my image is now 2817 x 2254 pixels which you can do using you edit software.

What camera and editing software do you have?


Photoshop Elements 8.
 
Does this mean I cannot get standard - 6 x 8, 8 x 10 photos showing everything I see through my viewfinder? Is it me? :shrug:
Lorraine

10x8 is the standard for headshots for actors but I hate using it precisely because of this cropping - 12x8 will print without any cropping or distortion if you want a large print.
 
Your best bet is to ask the printer to print the full length of the image - you will then get narrow unprinted strips on either side, but will have your whole image printed.

As Andrew says, it is down to the ratio or shape of the picture your camera produces, usually (for digital cameras and 35mm film) that is 3:2, so a 6x4 or 12x8 works perfectly and fills the paper.

On the other hand, a 10x8 will either show an 8" wide print with 2" cropped off the length of your image, or a 10" long print with just over 1" of white space along the side of your print.

HTH.

Sorry if I am repeating what Pete said, he posted while I was typing!
 
Last edited:
Its to do with the image from your camera. Most photo labs require require you to size your images for printing which you can do in your photo editing software

My 20D camera creates images 3504 x 2336 pixels so I would need to crop that image down to fit 6x8 or 8x10 image so for 8x10 my image is now 2817 x 2254 pixels which you can do using you edit software.

If I was to do this, do I lose quality by having fewer pixels?
 
No need to crop, just resize the image using inches or cm as the measurement, and maintain aspect ratio; all your image is then printed as above, with no loss of quality.
Remember to resize the image before you sharpen or you will get an odd effect on the edges.
Also remember that each time you are editing, cropping or resizing, to leave your original file untouched and work on a copy of it, then if it all goes wrong you can start again.
 
No because you are cropping your image to a specific size for printing.

You large image produces a image with these dimension 4,288 x 2,848 (L) which will produce a larger image than 8x10 if you were to print it.

Have a look at this video, you can use the simple ratio pre-sets an crop the image or play with the image
http://www.youtube.com/watch?v=mWRI62WTldY&feature=related
 
Last edited:
No need to crop, just resize the image using inches or cm as the measurement, and maintain aspect ratio; all your image is then printed as above, with no loss of quality.
[/QUOTE

I have to do each pic individually?
 
unless you write an action to do them all upon loading, yes.........
 
Individually is fine for now - may look into the uploading option at a later date.


Great stuff - Thanks to everyone who has taken the time to answer my query - I just love this site, everyone's so friendly and helpful. I've learnt loads since I joined. I'm off to resize a few pics then.:D

Thanks again everyone!:wave:
 
Back
Top