Nikon FG in great condition

I need to learn how to replace light seals, have yet to attempt this.
A messy but not a difficult job, before you start,cut a piece of thin cardboard to cover the shutter and hold it in place with some low tack masking tape, use a stiff brush to remove the remnants of the foam, clean off the glue and residue with some isopropyl alcohol or lighter fluid.

A little tip of fitting the new seals, soak them in water for a few minutes,it stops the glue from sticking on contact,
 
A messy but not a difficult job, before you start,cut a piece of thin cardboard to cover the shutter and hold it in place with some low tack masking tape, use a stiff brush to remove the remnants of the foam, clean off the glue and residue with some isopropyl alcohol or lighter fluid.

A little tip of fitting the new seals, soak them in water for a few minutes,it stops the glue from sticking on contact,
I'll give it a go on a camera that's broken.
 
I've used a chap on ebay for the foam in the past. It comes in sheets of varying thickness, and it's just a question of cutting it into strips, as needed.
 
Back
Top