Ninon D610 Error fault

sbowler579

sbowler579

Messages
15,454
Name
Steve (Being Kind)
Edit My Images
Yes
Turned on the 610 this morning to be greeted by the "Err" on the rear display, will not take a shot, no focus confirmation. Upon pressing shutter button it sounds like the mirror raises and a shot is taken but no image is displayed. Tried changing lenses and taking out the battery , but no luck yet.

Any ideas?
 
ST4 said:
Contacts witht the lens. Take the lens off then re-attach it. Clean contacts
Click to expand...

Tried that and still no luck.
 
Factory reset? (Two green buttons simultaneously for 3 secs)
 
sbowler579 said:
Turned on the 610 this morning to be greeted by the "Err" on the rear display, will not take a shot, no focus confirmation. Upon pressing shutter button it sounds like the mirror raises and a shot is taken but no image is displayed. Tried changing lenses and taking out the battery , but no luck yet.

Any ideas?
Click to expand...


Hi Steve, It's just a long shot as I don't have a 610. But I had a similar thing on a D800 and it ended up that the manual/auto focus switches ie lens & body were not set to the same. Could it also be if your using a G or D lens that the aperture is not set to the minimum mark and locked. Might be worth a checking.

George.
 
Last edited:
G.K.Jnr. said:
Hi Steve, It's just a long shot as I don't have a 610. But I had a similar thing on a D800 and it ended up that the manual/auto focus switches ie lens & body were not set to the same. Could it also be if your using a G or D lens that the aperture is not set to the minimum mark and locked. Might be worth a checking.

George.
Click to expand...

Thanks George, checked that and it didn't seem to make a difference, then moved the AF switch on the body from AF to Manual a few times and the error has stopped. Weird :eek:

Seems fine now. Thank you for the helpful suggestions gentlemen, have a good weekend.(y)
 
They're not green but marked with green dots

610_reset.jpg
 
Last edited:
sbowler579 said:
Thanks George, checked that and it didn't seem to make a difference, then moved the AF switch on the body from AF to Manual a few times and the error has stopped. Weird :eek:

Seems fine now. Thank you for the helpful suggestions gentlemen, have a good weekend.(y)
Click to expand...

Ok... too late - well done!
 
chuckles said:
They're not green but marked with green dots

610_reset.jpg
Click to expand...

Thanks Barry, I did find them eventually, looks like an error with the AF/M switch on the body, fine for now.
 
You must log in or register to reply here.
Back
Top