Shooting JPG on a D300 - I've never done that before

-Rob-

Say Cheese!...Oh, and call me Susan
Messages
3,931
Edit My Images
No
I’ve just agreed to shoot some candid shots at a conference that’s being held at work. The idea is that I wander round and capture the people throughout the day then about 200 shots will be used to create a slideshow for everyone to view at the end of the conference.

The problem is I won’t have the chance to do any processing so images have to be shot in JPG and will be straight from camera. Since I’ve had my pair of D300’s I’ve only ever shot in RAW so I’ve been able to tweek the images in PP but that’s not an option.

What menus and settings should I be looking at tweeking to try and get the best results from a JPG.

The conference is on 12th October so I have a while to practice and get the settings right before I shoot.
 
I really do think that there should be an option in the Nikon menus of RAW ONLY which turns off all the stuff that you are talking about such as active D lighting and all that stuff. I would still shoot in RAW+JPG and take your laptop. If you import them all into LR you can adjust exposure, contrast etc in literally 5 seconds per shot so 10-15 minutes (if things go wrong).
 
Look at the tweaks you would usually make to a similar bulk set in PP and try and replicate them with the cameras jpeg settings. If you'd normally bump the contrast and saturation up a few levels in post do that on the camera. It will be trial and error but you should quite quickly be able to get to an acceptable standard for this type of shoot, it doesn't sound like they want or need fine art quality.
 
I would bump the contrast, saturation and sharpening slightly myself but like you say, just take some test shots and look at the results until you're happy.
 
I really do think that there should be an option in the Nikon menus of RAW ONLY which turns off all the stuff that you are talking about such as active D lighting and all that stuff. I would still shoot in RAW+JPG and take your laptop. If you import them all into LR you can adjust exposure, contrast etc in literally 5 seconds per shot so 10-15 minutes (if things go wrong).
2 problems with that Darren, the main 1 being that my laptop screen still hasn't been fixed. I need to speak to you about that some time and find a time to pop round so you can have a look at it if the offer is still there.

Also, there is only 15 minutes from the end of the time I'll be taking photos to the showing of the photos in a slideshow so there is only time to load the photos on to the computer of the AV guys. I even have to delete the bad photos in camera so what's on the memory card is what goes in the slideshow.

Look at the tweaks you would usually make to a similar bulk set in PP and try and replicate them with the cameras jpeg settings. If you'd normally bump the contrast and saturation up a few levels in post do that on the camera. It will be trial and error but you should quite quickly be able to get to an acceptable standard for this type of shoot, it doesn't sound like they want or need fine art quality.
I don't think they are looking for a massively high quality, just very good snap shots really.

Where are the JPG settings on the D300? I've never used them before as I never shoot in JPG.

I would bump the contrast, saturation and sharpening slightly myself but like you say, just take some test shots and look at the results until you're happy.
Sounds good but how? :shrug:
 
I always shoot Jepg on My D60

It depends on the room and lighting! that a couple practice shots with the white balance but I have never had any problem if I shoot a 18% grey card and set that as my white balance,

for the colour section it depends on how pretty the people are! If they are very pretty I would shoot in "normal" if average looking I would shoot in "softer" but keep an eye if you are shooting like this as sometimes the colours look de-saturated and other times they look washed out!

If its a hot room and every one is sweaty I would go for Black and white. actually usually everybody is very positive when I shoot black and white so that might be my first choice, the noise is much less obvious and if it is there it just adds to the black and whityness of the photo!

I always have Active D lighting on and noise reduction but your sensor is better than mine!

Oh and if you take a photo that you feel has nailed it hit the AE-L button so that it is write protected so that you don't accidently delete it while deleting the duffers

Hope that helps

Stuart
 
Last edited:
for the colour section it depends on how butiful the people are! If they are very pretty I would shoot in "normal" if avarage looking I would shoot in "softer"
It is a conference for Aerospace Engineers so they are all going to be geeks with greasy hair, beards and tweed jackets. I don't think any of them will come in the 'very pretty' category although if there are any exceptions then I'll certainly hunt them down......in the interests of testing out the different camera settings!!! :lol:
 
It is a conference for Aerospace Engineers so they are all going to be geeks with greasy hair, beards and tweed jackets. I don't think any of them will come in the 'very pretty' category although if there are any exceptions then I'll certainly hunt them down......in the interests of testing out the different camera settings!!! :lol:

Well go for black and white, Removes white balance worries as well.

if you find somebody with completly white hair and bread go to spot metering the extra light coming from the hair will give them a god like apperince, with the rest of the image being a smidegen under exsposed (if you want to give them a god like apperince!) :D

Stuart
 
If you really feel like it you can crop (to a degree) and convert to sepia, B+W, and a bunch of other things in-camera. In playback mode, hit Menu on the photo you want to edit and hunt through the options - they're all there.

Whatever you chose, it creates a copy so the original is preserved.
 
Back
Top