Slow shutter speeds and night photography

Messages
45
Name
Dave
Edit My Images
No
Morning all, I've recently taken up photography and have a D40 with the standard 18-55 and have just bought the Nikon 55-200 VR zoon lens. Sorry if these are really basic question but how do I make the shutter speed slower? I've seen some really nice photo's of waterfalls/water etc which look almost smokey and I want to do some night shots but am really unsure how to capture them - please help... ps. as you can probably tell, i'm not technically gifted so laman's terms if you would, please.
 
For night shots, in manuel mode set the f setting for 11 or 16 and set speed to 20-30 seconds.
For slow water in daylight etc you would need an ND filter to reduce the light entering the lens which will enable you to use slower speed
I use ND8 set f to 16 and on aperture priority the system will select the speed. You can play about with the speed and experiment.
Hope this helps
Peter
 
There are a number of ways, firstly select your lowest ISO setting, then select the highest aperture ie f22 (you are paying a penalty on big DOF). Then select the time of day early morning/evening to reduce the light. These are the cheap options and cost nothing but are all a compromise.

The alternative is to firstly add a circular polariser (best option anyway when taking water shots almost a must) this will gain you a stop + then use ND filters, these can be screw in or the square Cokin or Lee filters. These can now be up to 10 stops. The advantages of these are you can be far more selective on DOF & time of day.

Hope that helps
 
Thanks guys, Sorry, I've got my camera with me and set the dial on the top to M and then I believe I turn the dial (by thumb) which is giving me loads of numbers going up and down but mostly in multiples of 5, next to another number f4 (this doesn't seem to change), am I doing it correctly and how do I change the speed?
 
Hi Dave

What camera do you have?

On my camera in "M", I always set "Finger and thumb" (finger wheel first followed by thumb wheel second) because that's the order the numbers are displayed on the camera and light meters.

So if your camera is a Canon (don't know about other types), your finger wheel (next to your shutter release button) changes your shutter speed. It will read 10 when it means 1/10 of a second, and 10" when it means 10 seconds. All shutter speeds are whole numbers.

Then use your thumb wheel and the aperture numbers will change. The bigger the number, the more you will have in focus. Quite a few of the smaller numbers have decimal points. Aperture numbers on some displays have an "F" in front of them.

You can see these numbers on the top LCD screen as well as in your viewfinder.

Hope this helps you to get going Dave

Steve
 
Hi Steve, thanks for your response. I've got a Nikon D40 and when holding it, I have a dial on top which has the M, A, S, P, Auto settings etc which I'm guessing is my finger dial and the other is on the back and this changes all the numbers on my view screen and is easily reached by right thumb?? Sorry if this is making me really thick!! In terms of night shots, I have a few ISO settings, these are: 200, 400, 800, 1600 and HI 1, should i use 200 or 1600, or even the HI 1, didn't think it would be this confusing :-)
 
Okay Dave

[I AM HOPING I WILL BE RESCUED BY A NIKON TOG SOON]

I don't know too much about Nikon, but I'll try and help.

No, the M,A,S,P,Auto is not the finger dial I was referring to. That is your mode dial. This is where you select M to put it into Manual mode. When you are in M your other wheel(s) will only set one number at a time. If you are in A, S or P mode you will end up changing two as you move your other wheel(s).

Hopefully a Nikon tog will come up soon and rescue you

Steve
 
Dave,I assume you didn't get a manual with the D40?

Download a PDF one from the Nikon website.
 
I've not had the opportunity to play with a D40 but if it's anything like my D3000 then I should be able to be of some help, not much of it but a little. Looking straight at the back of the camera there is the thumb wheel in the top right corner which you can spin to adjust the shutter speed. To adjust the aperture there may be a small button quite close to the shutter release button which if you hold down and operate the wheel should allow you to open or close the aperture accordingly.
 
Thanks guys and thanks for the diagram Willenium, all your help has been greatly appreciated. Thanks, Dave.
 
You need to read the instruction book Dave. Nobody on the planet can work a new camera 100% without doing that (although plenty try ;) ).

Quick lesson in exposure control. You need a certain amount of light for correct exposure. The brightness of everyday subjects varies massively, like at least 1,000x throughout the day, and your eye copes with this without you even noticing, but it is actually working in a similar way to a camera.

To get the right amount of light on the sensor, there are three controls. The shutter speed is one, which varies the amount of time the sensor is exposed to light. The lens aperture, expressed as an f/number, varies the size of the hole through which light passes. Then there is ISO, which varies the sensitivity of the sensor to light.

All these controls works on a halving/doubling principle, although it's not always obvious. With the shutter speed, obviously 1/250sec is half 1/125sec and so on, but also with the lens aperture f/4 is twice the light passing area of f/5.6, which is twice f/8 and so on. The relationship is the square root of 2, ie 1.4x, for historical reasons - you just have to learn them I'm afraid. Then there is ISO, where ISO200 is half as sensitive as ISO400 etc. If you think about it, 1/500sec at f/4 and ISO400, is the same effective exposure as 1/125sec at f/5.6 and ISO200.

You mix and match these controls both to vary the exposure in line with the amount of light available, and also to create effects - like a long shutter speed to blur water. A long shutter speed will allow a lot of light on to the sensor, so you have to compensate that by using a high f/number and/or low ISO. With extremes, such as a blurry waterfall in bright sun, the camera hasn't got enough scope so you need to fit something like a neutral density filter over the lens, to reduce the amount of light - basically dark glasses for your camera.

Tip: most people set the ISO and pretty much leave it there, and adjust exposure using just shutter speed and f/number. Only adjust the ISO when you've run out of options on the other controls. Try ISO400 :)

Edit: you will hear people talk about 'stops' - one stop is any halving or doubling of exposure (another historical term). The difference between f/4 and f/5.6 is one stop, 1/125sec to 1/500sec is two stops, ISO200 to ISO1600 is three stops, and so on.
 
Thanks Hoppy, i'll def read the manual, think i might stick to riding my motorbike instead though:lol: Think i'l l also look for a course locally. Was hoping to go out tonight but the weather is awful! Thanks for the tips and have a good BH weekend. Dave.
 
Back
Top