Star trails, keeping the lens condensation free at night??

Messages
586
Edit My Images
Yes
Anyone help me with this, was out last night shooting some star trails, did a one hour shot but after 50 mins, and i didnt notice this until i had stopped so lost about 15 frames, the lens was all steamed up, condensation?
How can i stop this? anyone got any tips

One mistake i did make was i had left a UV filter on the lens by mistake, didnt spot it in the dark :lol: but if it wasnt that i know it would of been the lens anyway

That small cloud coming in at the bottom was a bit annoying :(


Untitled by 4737 carlin, on Flickr
 
The physics say you need to keep the lens if not camera warmer than the air, not easy.
You might be able to apply a surface treatment to a clear filter which would reduce it.
When motorbiking visors do it too, some swear by a drop of neat washing up liquid and polish off....
 
4wd said:
The physics say you need to keep the lens if not camera warmer than the air, not easy.
You might be able to apply a surface treatment to a clear filter which would reduce it.
When motorbiking visors do it too, some swear by a drop of neat washing up liquid and polish off....

I used to do this with my visor but that's soap on plastic and it only really worked for so long depending on the amount of moisture (generally) but I wouldn't trust it on my lens just in case and if it's put on a filter, wouldn't you still get the same issue on the lens as there is still the air between the two? Not sure. You could try hand warmers round the lens??
 
put the camera outside in a plastic bag for 15 mins or so before using to allow the temperature to stabilize, then when you have finished , pop it back in the bag , seal it and then leave it inside again 15-20 min to stabilize.
If the air temperature is the same as the camera, there is less chance of condensation.

what you have here is warm moist air trapped behind filter hitting cold filter surface, and it condenses.


This is basically what all astronomers do with their telescopes and optical kit, even the big ones on the tops of mountains.
 
put the camera outside in a plastic bag for 15 mins or so before using to allow the temperature to stabilize

This is the best way to make sure your lens fogs up as quick as possible. Condensation happens when the surface cools below the dew point. Pre-cooling it will make it happen faster.

Just think about your car windows. Does allowing them to equilibrate for a few hours stop condensation or frost from forming?


what you have here is warm moist air trapped behind filter hitting cold filter surface, and it condenses.

The amount of moisture in such a small volume will have minimal impact.


This is basically what all astronomers do with their telescopes and optical kit, even the big ones on the tops of mountains.

They do let them equilibrate. But it's got absolutely zero to do with condensation. It's to minimise air currents in the optical tube caused by convection.
 
I use 12 volt heater bands that work by keeping the lens just above ambient and will keep the lens fog free all night. Linky
 
What about one of those throw away hand warmers held on by a rubber band?
Sounds daft I know....but you never know it may just work!

Neil.
 
Get a second tripod (and third if you like) can just be a cheapo one, and stick one of those little handheld fans on it. Point this at the lens (making sure it's not in shot) the movement of air will help delay condensation forming.

You could stick the fan onto the tripod with your camera, but you will get vibrations which will soften your shot.

My lecturer from uni taught us this, he used to shoot a lot of very long exposures back in the days of film. Seems to do the trick.
 
Back
Top