Using built in flash effectively

BarryG

I'll stick to my 2 inches
Messages
1,264
Edit My Images
No
I've been asked to take some photos on Saturday night. The setting is a room that hasn't got the best lighting, but it certainly isn't dark.

The shots are all posed standing still, a group of 3-5 people.

Now ideally I'd have a speed light, but I don't. I wondered if anyone know of a hand made bodge to make the built in flash a bit nicer?

I was thinking of some kind of attachment that would widen the range with something over the front to diffuse the light a little.

I'll possibly be asked to do more of these, so I'll pick up a proper flash when I can afford it (looked at Jessops 360, very unimpressed with the build quality).

So, in the meantime I need a short term alternative. Is there one?
 
Thanks for that, I did just happen across another article that suggested the same thing.

Looks like Google has quite a few options.

I'd be interested to hear from people who have actually used one of these methods.
 
I have one of these but the difference is minute. Another alternative is the Gary Fong diffuser which gets reasonable reviews. I gave up and just bought a SB-700 :D
 
I bought a "pop up flash diffuser" from amazon for a couple of pounds which looks like the Gary fong one, does a reasonable job if you have a play with the flash compensation. I've also got one like posted above which is next to useless.
 
Another alternative is the Gary Fong diffuser which gets reasonable reviews.

I have a Gary Fong diffuser but that is for the speed gun. It works well but I do get a few weird looks when at events. It is a bit on the overt side!
 
Use a small make-up mirror to bounce the flash off the ceiling or the wall. Think of the surface it is bouncing off as a the light source, so you might want to consider where everyone is in relation to what you want to bounce off.

***CLOSE YOUR EYES WHEN YOU PRESS THE SHUTTER*** :D
 
The problem with the pop-up is the power is feeble, and you need loads of it for bouncing or any other diffusion technique likely to make any difference.

By all means have a go, but whack the ISO as high as you dare to help it along and do not under exposure or you'll be plagued with noise. You need a bit of depth of field with groups too.

If there is any meaningful ambient light about, maybe direct fill-in flash balanced with ambient would do the trick?
 
Covering the built in with a piece of tissue paper works for a very quick 'nicer' effect on your flash. it won't make you look like a pro but it seems to work!
 
Covering the built in with a piece of tissue paper works for a very quick 'nicer' effect on your flash. it won't make you look like a pro but it seems to work!

I used a fag paper on a disposable, however, with flash-comp you shouldn't neet to do this.

As always, Hoppy gives some great advice.
 
I used to use a small piece of light brown opaque film stuck to the flash glass with spray mount, it was given to me by a pro film cameraman who I think described it as flesh-tone film that they used for studio lighting, worked a treat as it softened the harshness of the light and gave an overall warmer colour. It actually looked like unexposed 35mm film.
I know this isn't immediately helpful unless you happen to know a film cameraman but you may be able to think of a work-around!
 
The problem with the pop-up is the power is feeble, and you need loads of it for bouncing or any other diffusion technique likely to make any difference.

By all means have a go, but whack the ISO as high as you dare to help it along and do not under exposure or you'll be plagued with noise. You need a bit of depth of field with groups too.

If there is any meaningful ambient light about, maybe direct fill-in flash balanced with ambient would do the trick?

that would be my take on it. You can get really creative with the built in flash (I actually preferred it to a flashgun) but you need to know what you're after and ambient light helps.
 
Back
Top