What does F mean whilst shopping for lenses?

Messages
865
Name
Anand
Edit My Images
Yes
Hi all,

Sorry to ask a very very basic question. Am bit confused now as I've kind of jumped in to photography without having much of theory

My question is let's say I am shopping for a lens

e.g. a typical lens info would be -

SP AF 200-500mm F/5-6,3 Di LD [IF]

What does F mean in this? Is it the maximum (biggest) aperture size the lens would go up to?

Thanks,
 
Essentially, yes. The one in your example has a variable max aperture, so at 200mm the widest it will go to is f/5.6, however at 500mm it will only achieve f/6.3.
 
Thanks Graham :)..Just wanted to confirm..
 
Thanks for asking this - I knew what the aperture was and how it is used, but realised from the question that I had no idea what the f actually stood for. Now I do - it's "focal length". I do love Google :)
 
It doesn't stand for focal length, it stands for the ratio between the focal length and the maximum diameter of the hole the light passes through.
 
Thanks for asking this - I knew what the aperture was and how it is used, but realised from the question that I had no idea what the f actually stood for. Now I do - it's "focal length". I do love Google :)

It doesn't stand for focal length, it stands for the ratio between the focal length and the maximum diameter of the hole the light passes through.

Sorry, am more confused after reading the link posted by Brian...I thought the f/x stood for the ratio (in my dictionary aperture diameter, forgetting focal length, for shopping purposes)...Didnt think it stood for focal length...?
 
Thank you guys, will give it a read when my brain is fresh tmrw..
 
It is the ratio of the focal length divided by the diameter of the opening i.e a 200mm lens with an opening of 50mm would be f/4 . The same lens with the opening shut down to 25mm would be shooting at f/8. This is why the smaller f numbers mean a bigger aperture, which is often confusing for beginners.
 
To follow on from Scarecrow's post, it's really all to do with how much light a lens is capable of admitting.

Take a wide angle lens, say a 24mm. When it's pointing at a landscape it's taking in a lot of light, from the big tree on the left all the way to the church spire on the right, and concentrating it on a small sensor.

Now put a long lens, say a 300mm, and it's taking light from a much smaller area, maybe just the odd shaped bush in the centre of the 24mm image, and spreading it over the same sensor. It's clear that because the long lens is spreading less light over the same area (the sensor) the image will be darker.
In order to make an image the same brightness as the 24mm lens, the 300mm will need a bigger hole for the light to pass through.

Let's say the 24mm aperture (hole size) was 6mm. To give an image the same brightness using the 300mm, geometry shows it would need a hole 75mm in diameter.

The ratio between the focal length and the aperture size is the same for both lenses, in this case one quarter or focal length (f)/4

The reason for using f/x is (barring transmission losses in the glass itself) any two lenses with the same 'f-number' will produce images of the same brightness.

As you say in you original post, lenses are specified by focal length and maximum aperture, like 50mm f/2 The f/2 bit tells you how much (or little) light will produce useable images. The lower the number the more light the lens can admit.
 
Anand - there's a simple explanation here http://www.homephotog.com/tutorials/aperture.shtml and a long-winded explanation here http://www.uscoles.com/fstop.htm

As Graham says - in the case of an f/5-6.3 200-500mm zoom lens: f/5 is the widest aperture at 200mm and f/6.3 is the widest aperture at 500mm.
That uscoles.com link is excellent - good find :)

To follow on from Scarecrow's post, it's really all to do with how much light a lens is capable of admitting.

Take a wide angle lens, say a 24mm. When it's pointing at a landscape it's taking in a lot of light, from the big tree on the left all the way to the church spire on the right, and concentrating it on a small sensor.

Now put a long lens, say a 300mm, and it's taking light from a much smaller area, maybe just the odd shaped bush in the centre of the 24mm image, and spreading it over the same sensor. It's clear that because the long lens is spreading less light over the same area (the sensor) the image will be darker.
In order to make an image the same brightness as the 24mm lens, the 300mm will need a bigger hole for the light to pass through.

Let's say the 24mm aperture (hole size) was 6mm. To give an image the same brightness using the 300mm, geometry shows it would need a hole 75mm in diameter.

The ratio between the focal length and the aperture size is the same for both lenses, in this case one quarter or focal length (f)/4

The reason for using f/x is (barring transmission losses in the glass itself) any two lenses with the same 'f-number' will produce images of the same brightness.

As you say in you original post, lenses are specified by focal length and maximum aperture, like 50mm f/2 The f/2 bit tells you how much (or little) light will produce useable images. The lower the number the more light the lens can admit.
I've never thought about it like that - a good explanation of the 'why' behind the 'what' - thanks for your explanation :)
 
To confuse you further my Cosinon lens proclaims:

"Cosinon Auto MC F=2.5 f=40mm No.780858"

Good eh!
 
It doesn't stand for focal length, it stands for the ratio between the focal length and the maximum diameter of the hole the light passes through.

The f stands for focal length - it is the whole thing - eg. f/2.8 - that is the ratio.
 
@ Ozei - Thanks have had a look at that them...preferred the first link though for a slow-reader like me...but will definitely check out the other one over the weekend


To follow on from Scarecrow's post, it's really all to do with how much light a lens is capable of admitting.

Take a wide angle lens, say a 24mm. When it's pointing at a landscape it's taking in a lot of light, from the big tree on the left all the way to the church spire on the right, and concentrating it on a small sensor.

Now put a long lens, say a 300mm, and it's taking light from a much smaller area, maybe just the odd shaped bush in the centre of the 24mm image, and spreading it over the same sensor. It's clear that because the long lens is spreading less light over the same area (the sensor) the image will be darker.
In order to make an image the same brightness as the 24mm lens, the 300mm will need a bigger hole for the light to pass through.

Let's say the 24mm aperture (hole size) was 6mm. To give an image the same brightness using the 300mm, geometry shows it would need a hole 75mm in diameter.

The ratio between the focal length and the aperture size is the same for both lenses, in this case one quarter or focal length (f)/4

The reason for using f/x is (barring transmission losses in the glass itself) any two lenses with the same 'f-number' will produce images of the same brightness.

As you say in you original post, lenses are specified by focal length and maximum aperture, like 50mm f/2 The f/2 bit tells you how much (or little) light will produce useable images. The lower the number the more light the lens can admit.

Really nice and sweet explanation...thank you for your patience!
 
The best analogy I've come across is the tap and bucket one...

Everything about photography starts with getting the exposure right, or in this analogy, filling the bucket.

To fill the bucket you can either open the tap right up and let it fill as fast as possible, or you can open it less and it will take longer to fill. Either way you get the correct amount of water to fill the bucket (i.e. get the correct exposure).

The aperture (f/number) is how open the tap is, the shutter speed is how long you leave it running.
 
The best analogy I've come across is the tap and bucket one...

Everything about photography starts with getting the exposure right, or in this analogy, filling the bucket.

To fill the bucket you can either open the tap right up and let it fill as fast as possible, or you can open it less and it will take longer to fill. Either way you get the correct amount of water to fill the bucket (i.e. get the correct exposure).

The aperture (f/number) is how open the tap is, the shutter speed is how long you leave it running.

The water and bucket analogy is a good one to explain exposure. Just to round it off:

Lens aperture is how far you turn the tap on.
Shutter speed is how long you leave it on for.
ISO is the size of the bucket.
Those are the three corners of the 'exposure triangle' in terms of camera settings.

And finally the brightness of the light is the water pressure.
 
Back
Top