What is a realistic minimum shutter speed for hand-holding at 600mm?

Messages
3,278
Name
Andy
Edit My Images
Yes
I've just bought myself a new telephoto prime lens (Nikkor 300mm f/4 AF-S) and won't get to try it out until tomorrow. So, whilst I'm sitting here in the office, daydreaming about it, I thought that it would be good to get some opinions from those in the know :naughty:.

Basically, this is the first 'long' lens that I've ever owned which doesn't have an kind of VR/IS/VC etc. and as I plan to use it with a 1.4x teleconvertor on a (1.5x) crop sensor, I am a little concerned about the shutter speeds which may be required to achieve blur-free images when hand-holding. On top of that, the equivalent focal length of 640mm (I believe :thinking:) is far longer than anything I've used before and is bound to have different limitations to shorter focal lengths.

I realise too that the grip and stance of the individual photographer will go a long way to determining this 'speed limit', but what are your opinions and experiences :shrug:?

How slow could I realistically expect to go, in order to get at least 80% of shots blur-free?

Thanks for your input :).
 
Typical rule of thumb would be 1/600, it might will be worth investing in a monopod though :)
 
Start at the rule of thumb speed (about 1/750th) and see how you get on then adjust up or down until you're happy that there's no camera shake. It may well vary according to all sorts of factors too - heartrate, blood pressure, adrenaline level, age, fitness...
 
Ideally 1/effective focal length. So if you're using a 1.4 tc and a 1.5 crop sensor:

1/(600*1.4*1.5) = 1/1260

That's just a guideline though, with a good technique, monopod, tripod etc I'm sure you can get it down!



Edit: Ignore that, I thought it was a 600mm lens you were putting a TC on! (and others have beaten me to it now anyway :) )
 
Typical rule of thumb would be 1/600, it might will be worth investing in a monopod though :)

Ah OK, so is there a 'rule' about this which I don't know about :thinking: (sounds very much as though there is ;))? Should have Googled first, perhaps.

As for the monopod, I do have one (and a couple of decent tripods), but one of the main things that I want to do with this lens is to photograph buzzards which are flying overhead. That means that I need to be able to swing the camera in an arc, lifting it high and low, as well as from left to right. I've tried this in the past with a monopod and just ended up lifting the monopod off the ground as I pointed the camera to a higher position in the sky :(.

The combination of this lens and the D90 is light enough to hold all day, so I don't really need any support for that reason either :shrug:.

That said, I'll certainly reconsider using one for photographing smaller birds in static situations.

Thanks for the input, Phil :thumbs:.
 
Ideally 1/effective focal length. So if you're using a 1.4 tc and a 1.5 crop sensor:

1/(600*1.4*1.5) = 1/1260

That's just a guideline though, with a good technique, monopod, tripod etc I'm sure you can get it down!



Edit: Ignore that, I thought it was a 600mm lens you were putting a TC on! (and others have beaten me to it now anyway :) )

Thanks Chris,

Everyone has beaten me to it as well - I type too much, too slowly! :p.

Anyway, thanks for explaining the rule of thumb to me. I'm rather embarrassed to say that I don't remember that one from the photography books that I read :( (I blame VR :razz:).

;)
 
If you're talking 'sharp' photos, you can get away with lower than 500th with a bit of practice...
But a monopod will make life easier...
 
Ah OK, so is there a 'rule' about this which I don't know about :thinking: (sounds very much as though there is ;))? Should have Googled first, perhaps.

As for the monopod, I do have one (and a couple of decent tripods), but one of the main things that I want to do with this lens is to photograph buzzards which are flying overhead. That means that I need to be able to swing the camera in an arc, lifting it high and low, as well as from left to right. I've tried this in the past with a monopod and just ended up lifting the monopod off the ground as I pointed the camera to a higher position in the sky :(.

The combination of this lens and the D90 is light enough to hold all day, so I don't really need any support for that reason either :shrug:.

That said, I'll certainly reconsider using one for photographing smaller birds in static situations.

Thanks for the input, Phil :thumbs:.

Rule of thumb states that length of lens = shutter speed, so example 300mm lens = 1/320 sec shutter speed, however you also need to take into account the sensor size of your camera so somewhere between 1/320 and 1/400 is a starter for 10 (adjust for 1.4x TC)..... It also depends on what you want to photograph and the conditions your photographing in and also whether you're panning or taking headon shots, but use the rule of thumb and adjust to where you feel comfortable and achieving constant results.
 
If you're talking 'sharp' photos, you can get away with lower than 500th with a bit of practice...
But a monopod will make life easier...

Hi Rob!

Yes, they need to be "sharp" sharp. There's little point in spending so much money on a lens (OK, it's not 300mm f/2.8 money, but it was enough for me ;)), just to wind up with pictures that look a little soft :(.

Mind you, for what I have in mind (photographing birds against a blue sky) I should easily be able to get these shutter speeds at f/5.6 without cranking the ISO up. It's more of a question of how far down I can stop the lens, without getting camera shake related blur (a little subject motion blur might actually be desirable, depending on how well I can pan :shrug:).

Can't wait to get out and try it for real tomorrow :naughty:.
 
Rule of thumb states that length of lens = shutter speed, so example 300mm lens = 1/320 sec shutter speed, however you also need to take into account the sensor size of your camera so somewhere between 1/320 and 1/400 is a starter for 10 (adjust for 1.4x TC)..... It also depends on what you want to photograph and the conditions your photographing in and also whether you're panning or taking headon shots, but use the rule of thumb and adjust to where you feel comfortable and achieving constant results.

That's great Pete, thanks, I get it now :thumbs:.

When I was playing around with the lens at home this morning, I got a lot of shots at around 1/250th and 1/400th, which looked sharp on the LCD screen. However, I know from experience that this can be deceptive and that you never really know until you view images at large resolution on a computer monitor :|.

Anyway, thanks to you and everyone else who took the time to answer this (rather basic/n00bie :() question, as it's given me a great point of reference to work from in future :thumbs:.

(Edit: I've just realised something - when I made those tests this morning, I didn't have the teleconvertor on, so those speeds I quoted weren't such a great achievement after all).
 
1/focal length as already suggested. Then take into consideration the other multipliers and I'd be looking at around 1/1250 minimum. Which basically means you will only be able to shoot in good light.
 
i wouldnt attempt it...get a monopod and use 1/500-1/1000 or higher

its a hell of a piece of kit to wave around and balance
 
i wouldnt attempt it...get a monopod and use 1/500-1/1000 or higher

its a hell of a piece of kit to wave around and balance

You think so :|? This is the 300mm f/4 Nikkor lens, not the 300mm f/2.8, that I'm talking about. Yes, it's a lot bulkier than a mid-range zoom, but compared to the combination of D700, TC & 70-200mm f/2.8 VR II lens that I was using until today, the D90 and 300mm f/4 is actually quite a bit lighter :).


Anyway, I'm off out in a minute to give it a try (without the monopod this time), so I'll see how I get on.

Thanks again for all of the advice and opinions :thumbs:.
 
You think so :|? This is the 300mm f/4 Nikkor lens, not the 300mm f/2.8, that I'm talking about. Yes, it's a lot bulkier than a mid-range zoom, but compared to the combination of D700, TC & 70-200mm f/2.8 VR II lens that I was using until today, the D90 and 300mm f/4 is actually quite a bit lighter :).


Anyway, I'm off out in a minute to give it a try (without the monopod this time), so I'll see how I get on.

Thanks again for all of the advice and opinions :thumbs:.

guess my experience of big lenses is a bit dated....cheers
 
Back
Top