Best focus and metering settings for bird photography.

Messages
2,909
Name
Nick
Edit My Images
Yes
If you have seen my poor first attempt at bird photography in the bird section then you know why I am asking these questions.
Only had my 55-200 kit lens so I appreciate that is not the best tool.

Which focusing mode should I use? I chose continuous with dynamic.
Metering mode was matrix but should I have metered from the sky or over exposed or taken a reading from the trees?
Shutter speed and ISO, I was using iso 800, shutter priority 1000th sec which obviously gave me noisy pictures.

Maybe falcons where a bit ambitious for the first attempt and the bloody eagle kept buggering off. When he finally returned the autofocus would sometimes lose him and I would have to refocus on a nearby tree to find him in the viewfinder again.
Take my hat off to you bird guys, it's not easy:bang:
 
hey, not an easy subject. I don't shoot birds as much but when I do I use a centre spot, and I use a centre biased exposure metering, but dial in 2/3 - 1 eV because the sky is nearly always lighter than your subject.
focus? some AI focus is handy but sometimes if you can lock just use one mode focus, which doesn't refocus until you completely re-press the shutter key
 
I would consider myself a newbie as well but learning all the time. The settings I mostly use are:
Aperture priority, not sure what Nikon call it
Single point (center) focusing
Spot metering
I manually set the iso depending on the light to give me a fast enough shutter speed.
If the birds are moving a lot I set focusing to AI servo if they are fairly stationary then I use one shot.
Hope this helps and I'm sure someone more knowledgeable will be along to put me in my place:lol:
 
Thanks for the replies guys, I maybe should have tried single point focusing but the falcons especially where a nightmare to keep central in the viewfinder.
 
I would consider myself a newbie as well but learning all the time. The settings I mostly use are:
Aperture priority, not sure what Nikon call it
Single point (center) focusing
Spot metering
I manually set the iso depending on the light to give me a fast enough shutter speed.
If the birds are moving a lot I set focusing to AI servo if they are fairly stationary then I use one shot.
Hope this helps and I'm sure someone more knowledgeable will be along to put me in my place:lol:

I am a newbie too but i use centre weighted metering, reason being if you spot meter a magpie you can be way out, other birds will obviously provide similar issues, i use ai servo all the time as you never know when you are going to get that flight shot, providing your shutter speed is high enough,
Atb
Cliff
 
Speedy136 said:
If you have seen my poor first attempt at bird photography in the bird section then you know why I am asking these questions.
Only had my 55-200 kit lens so I appreciate that is not the best tool.

Which focusing mode should I use? I chose continuous with dynamic.
Metering mode was matrix but should I have metered from the sky or over exposed or taken a reading from the trees?
Shutter speed and ISO, I was using iso 800, shutter priority 1000th sec which obviously gave me noisy pictures.

Maybe falcons where a bit ambitious for the first attempt and the bloody eagle kept buggering off. When he finally returned the autofocus would sometimes lose him and I would have to refocus on a nearby tree to find him in the viewfinder again.
Take my hat off to you bird guys, it's not easy:bang:

Are these birds in flight or stationary? There is a big difference in the two types of settings imo. If they are in flight then your priority would be shutter speed to freeze the subject. If their stationary I would still consider shutter priority unless you have really good light then I would consider aperture priority and keep an eye out for the shutter speed. These guys move fast and often. There is no shame in using a priority mode when you have a fast moving subject. Manual can be very tricky with birds from my experience.
 
For birds in the air, on the water or otherwise out in the open I'll normally use manual exposure, spot metering from either :

a) a "neutral" tone in the scene, such as green grass at 0 on the camera's meter, or my own palm at +1.3 stops. I will factor in some adjustment adjustment depending on whether my expected subject is bright/white, dark/black, or somewhere in between;

b) for BIF against a bright sky (backlit clouds) I'll spot meter off the brightest part of the sky against which I expect to shoot, with the meter at +3 stops.

I choose manual exposure because the light on the subject will probably not be changing rapidly and frequently and it is easier to lock the exposure for the incident light than to keep juggling exposure compensation for subjects of assorted tones and sizes/positions within the frame against backgrounds of assorted tones.

I will try to position myself so that the brightest light source, be it sunshine or simply brighter areas of sky, is somewhere behind me, ideally over one shoulder rather than precisely behind me. That way I am not shooting into the shadow side of the subject (or scene) and don't have to do battle with a background which is more brightly lit than my subject.


If I'm in more covered areas, such as walking through woods or shooting into a tree line, where the light on the subject can be very variable as I pan the camera round or move from spot to spot, I will probably use partial metering in Av mode with auto ISO and let the camera pick a shutter speed which keeps me safe from camera shake (and if I have a long lens, also subject blur).


As for focusing, for moving stuff it will be AI Servo (Continuous) and as few active AF points (often as little as one) as necessary in order to maintain focus on the subject. I use back button focusing so that I can pause focusing if the focus point slips onto the background, whilst still having the option to take a shot.
 
Back
Top