Thats what the Bulb setting is for AlfOh and a wireless remote too
Les![]()

exactly. why cant camera's do longer then 30seconds?
why must i pull out a sheet, workout the exposure i want, ISO and apprture and buy an external trigger to do this?
seems like a chore tbh
It's not hard to multiply by two a few times anyway.what increments of time will you increase speed by 1 second, 5 seconds, 15 seconds a minute,
I guess because at what point do you stop, my long exposures can be any length but a set time in camera would be pointless to me, even if I expect an exposure to fall into one of the pre-set shutter speeds I still use bulb, what increments of time will you increase speed by 1 second, 5 seconds, 15 seconds a minute, it's going to take you and age to scroll to a 30 minute exposure
Bulb and a trigger is so much easier![]()
I guess because at what point do you stop, my long exposures can be any length but a set time in camera would be pointless to me, even if I expect an exposure to fall into one of the pre-set shutter speeds I still use bulb, what increments of time will you increase speed by 1 second, 5 seconds, 15 seconds a minute, it's going to take you and age to scroll to a 30 minute exposure
Bulb and a trigger is so much easier![]()
You have to work out the exposure for any shot you take.It's not hard to multiply by two a few times anyway.
At these times, it is totally ridiculous not to offer such functionality. It's electronics, it is not like its limited to by some cog or a screw like it used to be. Wireless remote may be nice, but most days a camera button should do the job
No u dont. the camera works out the ISO and apparture when shooting in Tv mode to the correct exposer based on your shutter speed. much faster then working it out
Except for the very long exposures the cameras totally loses the plot and it's a manual gueswork
At these times, it is totally ridiculous not to offer such functionality. It's electronics, it is not like its limited to by some cog or a screw like it used to be. Wireless remote may be nice, but most days a camera button should do the job
Umm you can always program it in camera. sheesh come on you dont have to scroll to everything and so what? its quicker to do so then buying a remote trigger, setting that up on your camera, getting pen and paper to work out the correct exposure manually. slower
Umm how does it lose the plot?
give it a go. At night you will most likely get a severely underexposed shot in Av mode, even if proper exposure was possible within 30s. After 1-2s exposure times its better to go manual.
Part of the problem is called 'failure of reciprocity' and can be further greatly exaggerated by some small bright lights in the frame
No u dont. the camera works out the ISO and apparture when shooting in Tv mode to the correct exposer based on your shutter speed. much faster then working it out
Well, you still have to work out if what the camera's meter is telling you, is what you want. As mentioned already, in very low light situations, chances are it's nowhere near what you want (nothing to do with reciprocity which isn't an issue with digital). Your meter probably isn't sensitive enough to work out what's going on half the time. You're also talking about using auto ISO, and letting the camera set your aperture at the same time. That's not going to fly with a long exposure (how would the camera know what you wanted?).
Also, as Matt says, you could very likely have changing conditions over a long exposure, so the initial 'correct' exposure wouldn't work out in the end anyway.
Long and the short of it, just buy a cheapy cable release and practice your mental arithmetic.![]()
2 thoughts:
1) It's to protect the sensor - if you could set an exposure of 5 minutes "easily" i.e. by just setting Tv to 5' - you could set this on a sunny day and the camera would dutifully allow, even on small aperture and you could risk burning it up? 30" offers a slight safety buffer.
2) It's irritating enough when you take a photo on 30" without checking and can't interupt it without turning off (which might not be good for the camera), so having to wait for 5' because you forgot to check a setting would be a right PITA
I have no idea if this is the case though, just my 2p's worth![]()
There is a counter on the camera when in bulb mode. So no need to externally time it.
No need to time it, no, but perhaps it's nice to set 20min and walk away with worrying of overcooking... My remote does it, but wouldn't it be nice?..
There is a T mode in modern cameras: IR remote. Touching the camera and pressing the shutter button moves the camera. Just use an IR remote, zero connections to faf about, just works with each press.
Something else that could easily be implemented in software.2) It's irritating enough when you take a photo on 30" without checking and can't interupt it without turning off (which might not be good for the camera), so having to wait for 5' because you forgot to check a setting would be a right PITA
Get one of these....
http://www.hkyongnuo.com/e-detail.php?ID=274
The best piece of cheap Chinese tat I've ever boughtAll flipancy aside... it's really brilliant, and cheap.
I believe only xxxD Canons have IR remote support... and it's flaky at best, and you need the external bit. What if you just took the camera and left the remote, or the battery died, or you don't want to expose the terminal to rain?
Get one of these....
http://www.hkyongnuo.com/e-detail.php?ID=274
The best piece of cheap Chinese tat I've ever boughtAll flipancy aside... it's really brilliant, and cheap.