Mac o/s 27 printing

[Stephen L]

After updating my Mac Studio M1 I found that Epson Print Layout (EPL) did not recognise any printers (I use an Epson 8550). Trying to reinstall EPL resulted in a failure message. Turning to Keith Cooper on YouTube I found he had experienced this issue, but better still he had solved the problem. Apparently the problem was that EPL relied on Rosetta, which is no longer included in the Golden Gate upgrade. Installing Rosetta via Terminal solved this. Just thought this might help. His video on this issue gives more detail.

 

[lindsay]

Same sequence of things here. NB though that MacOS v28 next year will not have the Rosetta option.

 

[Stephen L]

Same sequence of things here. NB though that MacOS v28 next year will not have the Rosetta option.

Perhaps, just perhaps, someone at Epson will have finally realised that as far as Mac are concerned, Intel processors are dead. Epson always seem behind with their drivers.

 

[dragonfly]

Thanks for the heads-up. Was about to update, but will hold back for a bit as I use Epson...

 

[Stephen L]

Thanks for the heads-up. Was about to update, but will hold back for a bit as I use Epson...

You might be waiting a while for Epson to wake up….

 

[Stephen L]

Same sequence of things here. NB though that MacOS v28 next year will not have the Rosetta option.

That's what I had heard also.

 

[LongLensPhotography]

There are a lot of issues with drivers for slightly older devices all-round, not just mac. My vcds scanner stopped working on windows and bloody ross tech wont release an update forcing you to buy a whole new one. My canon printer is presumably dead on macs in the same way.

There has to be consumer protection law requiring to open source the actual kernel driver. Same as being able to repair your car or tractor outside of stealership

 

[Constable]

FWIW Golden Gate also kills Fujitsu Scansnap scanners. You need to downlaod a new beta version of the app. It then works well, although I had to re-establish the wireless link.

 

[Delphin]

No issues at all on my 15 year old Samsung ML-1865W mono laser.