- Messages
- 1,732
- Name
- Robert
- Edit My Images
- Yes
Well I finally got my 300 AF-S and I have to say the IQ is stunning, this is straight out of camera, from NEF no sharpening or PP applied:
The focus in Single shot mode is superb and fast but I'm having some problems with continuous focus.
If the lens reaches its minimum focus distance on the focus ring it stops and won't AF again in 'C' unless I manually turn the focus back closer to the target distance, however this doesn't happen in 'S' where can focus from any initial focus position. At first I thought this might be due to one of my custom settings so I wiped them but still get the same problem. As I sit here at my desk I've done a little test:
Lens set to Full Focus Range and M/A focus mode. Camera focus mode set to Continuous, Dynamic Area AF (Center Switch, 9 points, Centered in the viewfinder).
If I dial the focus ring all the way out to the minimum focus distance of just under 1.45m and point it at a high contrast target some 30m away and depress the shutter button, or the AF-on button the lens just doesn't react. It doesn't hunt or try it just doesn't do anything at all. I noticed that the focus confirmation dot in the bottom right was flickering on and off.
Does this sound like normal behavior for this lens? Is it a known issue or perhaps a calibration issue? Should I send this to Nikon to be looked at?
Thanks for your input.
-Rob
The focus in Single shot mode is superb and fast but I'm having some problems with continuous focus.
If the lens reaches its minimum focus distance on the focus ring it stops and won't AF again in 'C' unless I manually turn the focus back closer to the target distance, however this doesn't happen in 'S' where can focus from any initial focus position. At first I thought this might be due to one of my custom settings so I wiped them but still get the same problem. As I sit here at my desk I've done a little test:
Lens set to Full Focus Range and M/A focus mode. Camera focus mode set to Continuous, Dynamic Area AF (Center Switch, 9 points, Centered in the viewfinder).
If I dial the focus ring all the way out to the minimum focus distance of just under 1.45m and point it at a high contrast target some 30m away and depress the shutter button, or the AF-on button the lens just doesn't react. It doesn't hunt or try it just doesn't do anything at all. I noticed that the focus confirmation dot in the bottom right was flickering on and off.
Does this sound like normal behavior for this lens? Is it a known issue or perhaps a calibration issue? Should I send this to Nikon to be looked at?
Thanks for your input.
-Rob
