Photos of UV Paint

Keltic Ice Man

Glossary King
Messages
3,179
Name
Allan
Edit My Images
Yes
Hi folks

I'm working with a make up artist that is using a lot of uv paints, for club work. I wondered what the best way of capturing the UV quality was.

I'm thinking that even with black lights on to show the UV paint at it's best the camera would need a really long exposure to capture it, and on a person this wont work.

So any secrets to it?

Thanks

Allan
 
Edit: should read the post properly since you already mentioned blacklights....sorry.
 
Last edited:
Whilst on hols, I went on a ride which was lit purely by UV reactive paint. Set the camera to manual, crank the ISO up and keep your fingers crossed. I can't see that you can do much more really.
You may want to take a good UV filter with you, and get good with shooting on manual. My camera was having difficulties focusing.

 
Thanks coldpenguin, would a uv filter not block the light rather than help?

does anyone know would flash kill it totally, if it was pointed in the background to up ambients?

I doubt a normal UV filter would make any real difference, but in theory the filter would 'filter out' the UV!

Can you not get some kind of filter to put on the flash that will bring out the UV? ... never heard of one, but who knows, it may be possible :shrug:
 
What about covering the flashhead with violet coloured acetone. Would that work? Just guessing here.:thinking:
 
I had a play with photographing some artwork done in UV pens, high iso shoot in raw then pump the blue channel in PP.

Just found this on the web, someone who made a blacklight flash! clicky
 
Last edited:
A UV filter will block the UV light. But it is not the UV light you actually want to record. Humans (most) cannot see UV. So when you use UV reactive paint, it converts the UV light hitting it into a form which humans can see. Think of it like an IR heater. You cannot see where the IR heater is heating, but if you touch an item that it is heating, it will be hot. In this instance the IR light is being converted into a lower intensity light form which we still cannot see, but which can actually increase the motivity of the atoms/elements hits in order to make it feel warm. Or a blue light on a green object makes it look yellowish.
However, your camera might still detect this light, and might make incorrect adjustments given what it perceives.
I don't think using a flash too much is going to help. It will expose the 'normal' light underneath, and in my experience (which is small, I must admit), UV reactives are not as bright as normal paint/reflections. If you do use a flash, dial it down several stops first I think. 1) I think that normal light response will drown out the UV reactive, 2) People who are in a darkened room to see the UV, will probably have large pupils :)

I don't think that putting a filter on a flash is going to help. I think you will need to get a proper blacklight bulb in order to 'flash' it. I would hope that a normal flashlight wouldn't give off much UV.
Remember that 'white' light is actually made up of thousands of different wavelengths of light. When we add a gel to change the colour of the white light, we are not actually changing those wavelengths, we are merely selectively filtering out the wavelengths that are not required, in order to leave behind the colour we want.
 
Last edited:
Humans (most) cannot see UV.
If you know someone with UV-cones, please refer to me or Moorfields, very interested.

I don't think that putting a filter on a flash is going to help. I think you will need to get a proper blacklight bulb in order to 'flash' it.
There are some flash-guns around, known to put out large amounts of radiation in the UV spectrum (I think Naturfotograf had an article about it). A low-pass filter on the flash blocking out visible light is useful in this case, as you'd only pick up the fluorescence generated by the UV flash. A UV-filter on the camera might be useful, depending on the strength of flashgun's UV-output (but probably the glass will absorb it all anyways).

edit: found the article: http://www.naturfotograf.com/UV_IR_rev04.html
 
Last edited:
I was assuming (hoping) that most normal flashes don't produce a lot of UV, it isn't particularly healthy for the human eye I believe.
I don't think that most flashguns output high levels. Even then, it's merely a brief exposure of a few milliseconds and your lens absorbs most of it anyways.

Some cataract patients apparently get a heightened UV response:
http://en.wikipedia.org/wiki/Color_vision
http://www.guardian.co.uk/science/2002/may/30/medicalscience.research
Sweet, I've never heard of that before. I'm surprised that the article claims blue cones absorb most in the UV though, because S-opsin has an absorption maximum at 437nm.
 
Back
Top