One point of premature failure is the tension ring for the zoom. Check that the zoom operates smoothly when loosened off and that it grips OK (don't try to force the zoom when it is tight) when tightened. If you see any signs of a black material coming out of the zoom tension ring, looking a bit like flecks of paper, then prepare for a bill. If the lens has become wet or the zoom forced when tightened the chances of failure increase. Mine started to go after a couple of years of careful use and after a further year it went back to Canon. Ever since the repair I've kept the tension ring loosened pretty much at all times. I have seen an example where the zoom action was a rough as nails and there were scratch marks (gouges) in the barrel.
Another minor irritation could be the fit of the hood. Mine is very free and I fear it could easily untwist and drop off unbeknown to me - it did once. I have added parcel tape to the bayonet threads on the lens just to tighten the grip. It looks sh!t but at least I won't lose the hood so easily.
Other than that it's the standard stuff - Does it look well looked after? Is it sharp (enough) wide open? Does the IS work OK without making a fearful noise? Dust inside shouldn't really be a problem for IQ, but you might check to see if there is an excessive amount. I think its reputation is a "dust pump" is not really fair, and I've never had a problem with mine in nearly five years, but worth checking anyway.