What to look out for when buying a used Canon 100-400mm lens

Messages
1,940
Name
Dini
Edit My Images
Yes
I would like to buy a Canon 100-400mm lens but not quite sure what to check. I have seen people asking for the date code for the lens.

Is there anything specific i should be checking? Is there any difference in the different date codes?
 
Check if the friction lock works on the zoom.
You might find bits of what looks like brown paper comming out from under the friction lock ring.
Also make sure it works with IS turned on., and lastly, if its grindy, or bumping when zooming. I am led to understand that the barings go quite easily on that lens.
 
One point of premature failure is the tension ring for the zoom. Check that the zoom operates smoothly when loosened off and that it grips OK (don't try to force the zoom when it is tight) when tightened. If you see any signs of a black material coming out of the zoom tension ring, looking a bit like flecks of paper, then prepare for a bill. If the lens has become wet or the zoom forced when tightened the chances of failure increase. Mine started to go after a couple of years of careful use and after a further year it went back to Canon. Ever since the repair I've kept the tension ring loosened pretty much at all times. I have seen an example where the zoom action was a rough as nails and there were scratch marks (gouges) in the barrel.

Another minor irritation could be the fit of the hood. Mine is very free and I fear it could easily untwist and drop off unbeknown to me - it did once. I have added parcel tape to the bayonet threads on the lens just to tighten the grip. It looks sh!t but at least I won't lose the hood so easily.

Other than that it's the standard stuff - Does it look well looked after? Is it sharp (enough) wide open? Does the IS work OK without making a fearful noise? Dust inside shouldn't really be a problem for IQ, but you might check to see if there is an excessive amount. I think its reputation is a "dust pump" is not really fair, and I've never had a problem with mine in nearly five years, but worth checking anyway.
 
Thanks guys. It sounds like buying this lens without testing it first is not recommended.
If it is not possible to see it first i guess i could ask the seller some of those questions first to confirm that it is ok.
 
Unless it comes with a solid warranty or you know you can return it without fuss for a full refund I would be very wary of buying unseen (and untested).

Even if it is in perfect nick you might find the AF calibration is not well matched to your camera and as you do not have AF microadjustment available in your body you won't be able to remedy the problem without a trip to Canon or one of their approved service partners. If it was bought new, with full warranty, then you could have Canon adjust it for you for free, but second hand.......?

Then again it might be perfectly matched. You just won't know until you try it.
 
They're the ones who sold the lens with the scratchy/grinding zoom action and gouges in the barrel. It was also as soft as sh!t.

http://www.talkphotography.co.uk/forums/showthread.php?t=306700

In fairness they go it sorted mechanically and optically under warranty, but the cosmetics remained tatty.

That's why I don't think you can be too careful. If you there is no comeback I would not buy untested and unseen.
 
Last edited:
Back
Top