What White balance to use for snow shots?

Messages
258
Name
Richard
Edit My Images
Yes
I started shooting in RAW as the snow was looking grey in my shots (Canon 30d AWB)
Now I can't access them from Zoombrowser!
What white balance should I have used?
 
If you have them in RAW, you can open them in Adobe Camera Raw, (ACR) and if you click on the little dropper on the toolbar and click on a bit that should be white it will correct it for you.
 
Two things here... if you're shooting to jpg normally then use a custom white balance on a (mostly) white shot and thereafter with a CWB setting calibrated off that frame you should be getting close.

The right thing to do is... what you've done, shoot RAW. Then you can pick your WB shot to shot in post. As for Zoombrowser not browsing/viewing.. sounds like an update to Canon RAW is in order.
 
If you can view your raw thumbnails in Zoom Browser, you will then need to go to the left of the screen and click edit, and then from the drop down menu choose DPP process Raw images.
 
NO the thumbnails don't show in Zoombrowser, they are on the camera and have downloaded as I can see them as cr2 files and the correct size??
 
Like in any situation, depends on the light! If your snow is looking grey the chances are it's underexposed though. Try using +1 exposure compensation and always check the histogram,.
 
The most likely cause of grey looking snow is under exposure, not white balance.

You should always over expose by around +2/3 - +1. This is because the camera's meter is calibrated to read white as 18% grey
 
I agree with Grendel - if your snow is coming out grey it's because you are underexposing. If your snow has a tinge of colour you may also need to adjust your white balance.
 
The most likely cause of grey looking snow is under exposure, not white balance.

You should always over expose by around +2/3 - +1. This is because the camera's meter is calibrated to read white as 18% grey

:plusone:
 
You should always over expose by around +2/3 - +1. This is because the camera's meter is calibrated to read white as 18% grey
Not quite - it's because the camera's meter is designed to assume that what you focus on is 18% grey. You can use exposure lock to get round this though.

As for white balance, I have heard (I think I read it in a photography maagazine last winter) that Auto is the safest setting for snow. If you're shooting RAW you can always adjust it later if there's one that looks better than what the camera picked.
 
FWIW, shadow areas in snow are often liable to look bluer than the rest of the scene, especially if you're photographing on a sunnier day after snowfall - they'll pick up blue tones reflected from the sky.

Your creative decision whether to run with that or 'correct' them.
 
I was shooting in the snow this morning. Lighting was changing over the course of maybe an hour, and for an appealing look I was using a temperature of anything from 5,500K to 10,000K. In some I could only take the temperature up so far, to kill the blue, before my subjects - deer - started to look a bit silly, so I set a WB to suit the deer and then partially desaturated the blue from the snow. My exposures were bang on - ETTR.

Here's one example. WB for this was 5,800K and +8 tint. I did not alter the snow further in this shot.

20100109_103323_1885_LR.jpg
 
I have to agree with others grey snow is not a white balance issue it's under exposing, I have found AWB on my 30D to be very good in snow.
 
Yup, thats a nice shot there.

I found after shooting on Auto WB on Saturday that adjusting to Daylight WB in Lightroom gave more accurate representation....
 
Back
Top